almost every camcorder on the market with a CCD will see IR quite well.


colour ccd can see IR, but i wouldnt describe it as "quite well", id say very poorly, and not all colour ccds detect ir light.

forget a B&W camera... grab most any low-end camcorder from the past 3 years
to see IR light from a remote.


u may have noticed how night vision is only possible with monochrome color?

like i said, "if your working with IR a lot", its handy to have a cheap $58 (thats new, off the shelf) B&W CMOS ccd sensor hooked up to an old tv or monochrome monitor, to see the IR almost perfectly, there is a huge difference between colour and b&w when it comes to IR sensitivity.
and where can u get even a low-end camcorder for $58 new?


..grab 10 IR LEDs and a b&w camera and watch how much u can see in the dark!

_________________________________________________________________
Hotmail is now available on Australian mobile phones. Go to http://ninemsn.com.au/mobilecentral/signup.asp




-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines
at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to