If I put input 1 it's blue screen , input 0 is green with static up top , which for my Ati TV-Wonder VE is the no signal screen , does yours go green with static for both 0 and 1?? and blue if no signal on 2??
----- Original Message ----- From: "Dave Smylie" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 13, 2004 11:41 PM Subject: RE: [Freevo-users] recording.. > Well, I can't say what input to use for you card, but for mine > > input=0 for tuner > input=1 unusued > input=2 for composite (what I actually use) > > If I don't include input=2, I just get a green screen like yours. > > You might also want to have a look at the output from your mencoder > command - some of the info at the start might help you find the problem. > > > Dave Smylie > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bikr > Sent: Wednesday, 14 January 2004 1:40 p.m. > To: [EMAIL PROTECTED] > Subject: Re: [Freevo-users] recording.. > > I also just tried with input 1 instead of 0 input 1 gives me blue > screen , > as it appears to be the rca in on the card. . 0 I'm sure is probably the > correct one , but for some reason , it's not getting the signal from the > card , could it be tuning in to the wrong frequency for the channels? I > tried a few channels and none of them seem to work .. --Josh > > > > ----- Original Message ----- > From: "Bikr" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, January 13, 2004 7:23 PM > Subject: Re: [Freevo-users] recording.. > > > > It starts recording ok and i'm using input as /dev/video0 if i set > it to > > video1 or any other video* that is in /dev , it doesnt' do anything at > all > > just doesn't run , video0 runs but it is all static that is recording. > When > > I watch tv @ the box though with freevo , i get a picture.. my > command > line > > is this.. > > > > > > bash-2.05b# /usr/bin/mencoder -tv > > > :driver=v41:input=0:norm=NTSC:channel=61:chanlist=us-cable:width=320:hei > gh > > > t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:fo > rcea > > udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts > > vcodec=mpeg4:vbitrate=1200:keyinit=30 -oac mp3lame -lameopts > > br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o > > /media/tv/0-13_11:30_Real_TV_-_.avi tv:// > > > > > > > > > > > > > > > > ----- Original Message ----- > > From: "Dave Smylie" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, January 13, 2004 6:49 PM > > Subject: RE: [Freevo-users] recording.. > > > > > > > Have a look at the command line freevo is using to kick off the > > > recording. Sounds like you're not specifying :input=# or something > > > similar on your command line. If you're using mencoder to record, > its > > > completely separate from freevo - ie, freevo shouldn't need to be > > > running. > > > > > > What I found easiest, was to take freevo's command line, and play > with > > > it until it recorded fine, then take those changes and make them to > > > VCR_CMD in local_config.py > > > > > > Cheers > > > Dave Smylie > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of Bikr > > > Sent: Wednesday, 14 January 2004 7:56 a.m. > > > To: [EMAIL PROTECTED] > > > Subject: Re: [Freevo-users] recording.. > > > Importance: High > > > > > > Ok , Now , new problem , recordings are starting , and when I grab > the > > > .avi > > > files , they are just static and the green screen that my video > always > > > shows > > > when there is no signal to it , however , there should be good > signal , > > > does > > > freevo need to be running , the front end I mean , for it to record > > > actual > > > video , or did I maybe miss a step? > > > > > > > > > ----- Original Message ----- > > > From: "Patrick M Geahan" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Tuesday, January 13, 2004 1:17 PM > > > Subject: Re: [Freevo-users] recording.. > > > > > > > > > > On Tue, 13 Jan 2004, Bikr wrote: > > > > > > > > > If I formed that command propery then it looks like the error is > > > telling > > > me > > > > > that I don't have mplayer configured properly , ie;; codecs.conf > > > isn't > > > there > > > > > and frameno.avi and mencoder etc.. any suggestions how to > fix??? > > > Below > > > is > > > > > the results of the command.. =\ > > > > > > > > Ignore that stuff. It's informative, nothing more. > > > > > > > > This is the important line: > > > > > > > > > -tv on is deprecated, use tv:// instead > > > > > Exiting... (error parsing cmdline) > > > > > > > > I had the same problem. Change the options line after -tv. Take > out > > > the > > > > 'on:'. Then, at then end of your command line, enter a tv://. > That > > > > should clear it up. > > > > > > > > -------Patrick M > [EMAIL PROTECTED]:3784715------ > > > > "You know, this is how the sum total of human knowledge is > increased. > > > > Not with idle speculation and meaningless chatter, but with a > > > > medium-sized hammer and some free time." - [EMAIL PROTECTED], > a.f.c-a > > > > > > > > > > > > ------------------------------------------------------- > > > > This SF.net email is sponsored by: Perforce Software. > > > > Perforce is the Fast Software Configuration Management System > offering > > > > advanced branching capabilities and atomic changes on 50+ > platforms. > > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > > > _______________________________________________ > > > > Freevo-users mailing list > > > > [EMAIL PROTECTED] > > > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > This SF.net email is sponsored by: Perforce Software. > > > Perforce is the Fast Software Configuration Management System > offering > > > advanced branching capabilities and atomic changes on 50+ platforms. > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > > _______________________________________________ > > > Freevo-users mailing list > > > [EMAIL PROTECTED] > > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > > > > > > > --- > > > Incoming mail is certified Virus Free. > > > Checked by AVG anti-virus system (http://www.grisoft.com). > > > Version: 6.0.558 / Virus Database: 350 - Release Date: 2/01/2004 > > > > > > > > > > > > > > > ------------------------------------------------------- > > > This SF.net email is sponsored by: Perforce Software. > > > Perforce is the Fast Software Configuration Management System > offering > > > advanced branching capabilities and atomic changes on 50+ platforms. > > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > > _______________________________________________ > > > Freevo-users mailing list > > > [EMAIL PROTECTED] > > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > > > > > > ------------------------------------------------------- > > This SF.net email is sponsored by: Perforce Software. > > Perforce is the Fast Software Configuration Management System offering > > advanced branching capabilities and atomic changes on 50+ platforms. > > Free Eval! http://www.perforce.com/perforce/loadprog.html > > _______________________________________________ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > --- > Incoming mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.558 / Virus Database: 350 - Release Date: 2/01/2004 > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
