On 9 Apr 2004, Jon Reynolds wrote: > On Fri, 2004-04-09 at 13:14, Lists wrote: > > I am using NTSC...I get a picture, but it looks like crap...and the > > channels are one off. > > > > > > On 9 Apr 2004, Jon Reynolds wrote: > > > > > On Fri, 2004-04-09 at 12:56, Lists wrote: > > > > I have a ATI tv card in the US, I have freevo working fine, BUT the > > > > picture sucks, if I tune to channel 60, I get one less (59) the picture on > > > > it looks very bad (no color lots of lines) > > > > > > > > > > > > Does anyone have any ideas? > > > > > > > > Thanks, > > > > Michael > > > > > > > Hi Mike, > > > > > > Are you using ntsc or pal? It should be ntsc for the states. > > > > > > Hope that helps, > > > > > > Jon > > > > Have you tried using xawtv to see if you can get a good picture using > that? In your local_config.py file do you have us_cable as your tuner? > > Jon > Using xawtv I can get things working ok, but when I choose a channel I have to press the -> button, till it reads channel 15 (20). When xawtv is set to what ever channel then (20) the picture is fine, however, the channels are all channel+1
???? Michael > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
