> Date: Wed, 28 Feb 2007 11:26:01 +0100
> From: Dirk Meyer <[EMAIL PROTECTED]>
> Subject: Re: [Freevo-users] LCD Monitor Setup Help
> To: [email protected]
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Elizabeth Dodd wrote:
> > On Wednesday 28 February 2007 18:18, L?on rsv wrote:
> >> You don't seem to have a valid modeline. I thought [EMAIL PROTECTED] is
> >> not HDTV
> >> spec, so your TV won't accept that on the HDMI input. So you have to feed
> >> it with a [EMAIL PROTECTED] modeline. You should be able to find one,
> >> there's
> >> plenty of modeline generators out there.
>
> IIRC HDTV supports 50Hz and 60Hz in the spec.
You're right.
>
> > I understood that xorg doesn't use modelines. Which is correct?
>
> You can use modelines and sometimes you must (for TV output). But you
> don't have to for normal operation.
I have to use a modeline to get my TV to accept [EMAIL PROTECTED], using
nvidia's
9631 driver. While my also manual states PC input over DVI is not
accepted it still does, so OP might be lucky.
Since OP's xorg.log states there's no valid modeline it might be
useful to play with modelines, perhaps something like:
Modeline "[EMAIL PROTECTED]" 143.55 1920 1952 2496 2528 1080 1103 1112 1135
Leon
>
>
> Dischi
>
> --
> panic("Aarggh: attempting to free lock with active wait queue - shoot
> Andy");
> 2.0.38 /usr/src/linux/fs/locks.c
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users