I just want to wrap up this thread with the final solution. After a week of investigation and learning, I found out that this Xorg message:
>>>> (--) NVIDIA(0): SHARP HDMI (DFP-0): 135.0 MHz maximum pixel clock >>>> (--) NVIDIA(0): SHARP HDMI (DFP-0): Internal Single Link TMDS Actual describes the capabilities of the video card, not the monitor itself. I believe this is the monitor reporting the capabilities it sees from the video card (I'm guessing here). Later in the xorg.log file, I get this (but didn't report to the list): (--) NVIDIA(0): --- EDID for SHARP HDMI (DFP-0) --- (--) NVIDIA(0): EDID Version : 1.3 (--) NVIDIA(0): Manufacturer : SHP (--) NVIDIA(0): Monitor Name : SHARP HDMI (--) NVIDIA(0): Product ID : 4067 (--) NVIDIA(0): 32-bit Serial Number : 16843009 (--) NVIDIA(0): Serial Number String : (--) NVIDIA(0): Manufacture Date : 2006, week 0 (--) NVIDIA(0): DPMS Capabilities : Active Off (--) NVIDIA(0): Prefer first detailed timing : Yes (--) NVIDIA(0): Supports GTF : No (--) NVIDIA(0): Maximum Image Size : 820mm x 460mm (--) NVIDIA(0): Valid HSync Range : 15.0 kHz - 68.0 kHz (--) NVIDIA(0): Valid VRefresh Range : 55 Hz - 76 Hz (--) NVIDIA(0): EDID maximum pixel clock : 150.0 MHz Which states that the monitor can handle the pixel clock of 150 Mhz. Finally, I found this switch to add to the Monitor or Device section: Option "ModeValidation" "NoMaxPClkCheck" Which results in this: (II) NVIDIA(0): Mode Validation Overrides for SHARP HDMI (DFP-0): (II) NVIDIA(0): NoMaxPClkCheck (II) NVIDIA(0): Frequency information for SHARP HDMI (DFP-0): (II) NVIDIA(0): HorizSync : 15.000-68.000 kHz (II) NVIDIA(0): VertRefresh : 55.000-76.000 Hz (II) NVIDIA(0): (HorizSync from EDID) (II) NVIDIA(0): (VertRefresh from EDID) (II) NVIDIA(0): (II) NVIDIA(0): --- Building ModePool for SHARP HDMI (DFP-0) --- (II) NVIDIA(0): Validating Mode "1920x1080": (II) NVIDIA(0): 1920 x 1080 @ 60 Hz (II) NVIDIA(0): For use as DFP backend. (II) NVIDIA(0): Mode Source: EDID (II) NVIDIA(0): Pixel Clock : 148.50 MHz (II) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (II) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (II) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (II) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125 (II) NVIDIA(0): H/V Polarity : +/+ (II) NVIDIA(0): Mode is valid. (II) NVIDIA(0): Now I get crystal clear 1080p attachment to my flat panel monitor. I suspect I'm stretching the capabilities of my $35 video card, however, I'm not violating the capabilities of my $2,000 monitor :-) Thanks for all your help!! Jim Duncan Webb wrote: > Jim Duda wrote: >> > Would something like this work? >> > >> > Section "Monitor" >> > >> > Identifier "Sharp LCD HDTV" >> > ModeLine "1920x1080_60-Sharp_D92U" 148.35 1920 2008 2052 2200 1080 >> > 1085 1090 1125 +hsync +vsync >> > Option "ExactModeTimingsDVI" "TRUE" >> > Option "ModeValidation" "NoDFPNativeResolutionCheck" >> > >> > EndSection >> >> Unfortunately, that Modeline doesn't work. I believe it's because the >> pixel clock of 148.35 is higher than the maximum of 135 Mhz. > > Here are some links that may help. > http://xtiming.sourceforge.net/cgi-bin/xtiming.pl > http://gentoo-wiki.com/HOWTO_Xorg_HDTV > > What the pages say is that it can be difficult to get the timings > correct and HDMI can be fussy about the ModeLines. > One thing I noticed is: > >>>> (--) NVIDIA(0): SHARP HDMI (DFP-0) >>>> (--) NVIDIA(0): SHARP HDMI (DFP-0): 135.0 MHz maximum pixel clock >>>> (--) NVIDIA(0): SHARP HDMI (DFP-0): Internal Single Link TMDS >>>> (II) NVIDIA(0): Mode Validation Overrides for SHARP HDMI (DFP-0): > > which means that nvidia driver thinks that you are connecting to a DFP > (digital flat panel) as opposed to a TV. I'm wondering if a HDTV is a > digital flat panel or a TV. I would guess that a DFP is correct, which > means that the ModeLines will work. > > One of the howtos said that when starting X add "-- -logverbose 6" to > that startx command line for more detailed information about why > modlines are not being accepted. > > Duncan > >> Jim >> >> Duncan Webb wrote: >>> On Wed, 28 February, 2007 11:14 pm, Jim Duda wrote: >>>> By adding these two lines to the "Monitor" Section of Xorg.conf >>>> >>>> >>>> Option "ExactModeTimingsDVI" "TRUE" >>>> Option "ModeValidation" "NoDFPNativeResolutionCheck" >>>> >>>> >>>> I was able to get 1360x768 to work. >>>> >>>> >>>> If my settop box can do 1920x1080 with a 135Mhz pixel clock, I don't see >>>> why not X wouldn't work somehow, still researching. >>>> >>>> (II) Setting vga for screen 0. >>>> (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 >>>> (==) NVIDIA(0): RGB weight 888 >>>> (==) NVIDIA(0): Default visual is TrueColor >>>> (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) >>>> (**) NVIDIA(0): Option "NvAGP" "1" >>>> (**) NVIDIA(0): Option "XvMCUsesTextures" "false" >>>> (**) NVIDIA(0): Option "ExactModeTimingsDVI" "TRUE" >>>> (**) NVIDIA(0): Option "ModeValidation" "NoDFPNativeResolutionCheck" >>>> (**) NVIDIA(0): Enabling RENDER acceleration >>>> (**) NVIDIA(0): Use of NVIDIA internal AGP requested >>>> (II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 at PCI:1:0:0 (GPU-0) >>>> (--) NVIDIA(0): Memory: 131072 kBytes >>>> (--) NVIDIA(0): VideoBIOS: 04.34.20.87.00 >>>> (II) NVIDIA(0): Detected AGP rate: 4X >>>> (--) NVIDIA(0): Interlaced video modes are supported on this GPU >>>> (--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at >>>> PCI:1:0:0: >>>> (--) NVIDIA(0): SHARP HDMI (DFP-0) >>>> (--) NVIDIA(0): SHARP HDMI (DFP-0): 135.0 MHz maximum pixel clock >>>> (--) NVIDIA(0): SHARP HDMI (DFP-0): Internal Single Link TMDS >>>> (II) NVIDIA(0): Mode Validation Overrides for SHARP HDMI (DFP-0): >>>> (II) NVIDIA(0): NoDFPNativeResolutionCheck >>>> (II) NVIDIA(0): Assigned Display Device: DFP-0 >>>> (WW) NVIDIA(0): No valid modes for "1920x1080"; removing. >>>> (II) NVIDIA(0): Validated modes: >>>> (II) NVIDIA(0): "1360x768" >>>> (II) NVIDIA(0): "1280x1024" >>>> (II) NVIDIA(0): Virtual screen size determined to be 1360 x 1024 >>>> (--) NVIDIA(0): DPI set to (42, 42); computed from "UseEdidDpi" X config >>>> (--) NVIDIA(0): option >>>> (--) Depth 24 pixmap format is 32 bpp >>> Would something like this work? >>> >>> Section "Monitor" >>> >>> Identifier "Sharp LCD HDTV" >>> ModeLine "1920x1080_60-Sharp_D92U" 148.35 1920 2008 2052 2200 1080 >>> 1085 1090 1125 +hsync +vsync >>> Option "ExactModeTimingsDVI" "TRUE" >>> Option "ModeValidation" "NoDFPNativeResolutionCheck" >>> >>> EndSection >>> >>> I found these lines at: >>> http://www.mythtv.org/wiki/index.php/Modeline_Database >>> >>> Duncan >>> >>>> Jonathan Isom wrote: >>>> >>>>> It depend upon the driver. newer nvidia binary drivers don't use >>>>> modelines. >>>>> >>>>> On 2/28/07, Elizabeth Dodd <[EMAIL PROTECTED]> wrote: >>>>> >>>>>> On Wednesday 28 February 2007 18:18, Léon rsv wrote: >>>>>> >>>>>>> You don't seem to have a valid modeline. I thought [EMAIL PROTECTED] is >>>>>>> not HDTV spec, so your TV won't accept that on the HDMI input. So >>>>>>> you have to feed it with a [EMAIL PROTECTED] modeline. You should be >>>>>>> able >>>>>>> to find one, there's plenty of modeline generators out there. >>>>>> I understood that xorg doesn't use modelines. Which is correct? >>>>>> >>>>>> >>>>>> -- >>>>>> New York's got the ways and means; >>>>>> Just won't let you be. >>>>>> -- The Grateful Dead >>>>>> >>>>>> >>>>>> --------------------------------------------------------------------- >>>>>> ---- >>>>>> Take Surveys. Earn Cash. Influence the Future of IT >>>>>> Join SourceForge.net's Techsay panel and you'll get the chance to >>>>>> share your opinions on IT & business topics through brief surveys-and >>>>>> earn cash >>>>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DE >>>>>> VDEV >>>>>> _______________________________________________ >>>>>> Freevo-users mailing list >>>>>> [email protected] >>>>>> https://lists.sourceforge.net/lists/listinfo/freevo-users >>>>>> >>>>>> >>>>> ----------------------------------------------------------------------- >>>>> -- >>>>> Take Surveys. Earn Cash. Influence the Future of IT >>>>> Join SourceForge.net's Techsay panel and you'll get the chance to share >>>>> your opinions on IT & business topics through brief surveys-and earn >>>>> cash >>>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVD >>>>> EV >>>>> >>>> ------------------------------------------------------------------------- >>>> Take Surveys. Earn Cash. Influence the Future of IT >>>> Join SourceForge.net's Techsay panel and you'll get the chance to share >>>> your opinions on IT & business topics through brief surveys-and earn cash >>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >>>> _______________________________________________ >>>> Freevo-users mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/freevo-users >>>> >>>> >>>> >>> >>> ------------------------------------------------------------------------- >>> Take Surveys. Earn Cash. Influence the Future of IT >>> Join SourceForge.net's Techsay panel and you'll get the chance to share your >>> opinions on IT & business topics through brief surveys-and earn cash >>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >> >> ------------------------------------------------------------------------- >> Take Surveys. Earn Cash. Influence the Future of IT >> Join SourceForge.net's Techsay panel and you'll get the chance to share your >> opinions on IT & business topics through brief surveys-and earn cash >> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >> _______________________________________________ >> Freevo-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/freevo-users >> > > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Freevo-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freevo-users
