> Hi,
>
>>
>> You need to search the lirc mceusb2 driver source for the vendor and
>> product on your ir driver. Some where added in the last months for
>> Shuttle.
>
> I`m using lirc 0.83pre1 as the stable one doesnt compile against
> kernel 2.6.23. I tried to play with the lirc_mceusb2 source to add my
> device, but I get a strange error... look:
>
> freevo:~# lsusb -v (full output attached)
> ..
> idVendor 0x051c Shuttle, Inc.
> idProduct 0x0005
> bcdDevice 5.12
> iManufacturer 4 Shuttle Inc
> iProduct 28 VFD Module
Are you sure that this is the ir usb device, this is the LCD display.
What about "Bus 006 Device 002: ID 04cf:0022 Myson Century, Inc."
You can try adding these and removing the shuttle2. IIRC someone, on the
lirc list, had a similar problem with their shuttle remote and resolved it
this way.
>
> so I changed lirc_mceusb2 and added:
>
> #define VENDOR_SHUTTLE2 0x051c
>
>
> /* Shuttle eHome Infrared Transceiver */
> { USB_DEVICE(VENDOR_SHUTTLE2, 0x0005) },
>
>
> freevo:~# modprobe lirc_mceusb2 debug=1
> lirc_dev: IR Remote Control driver registered, major 61
> lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE 2005
> Remote Control driver for LIRC $Revision: 1.36 $
> lirc_mceusb2: Daniel Melander <[EMAIL PROTECTED]>, Martin Blatter
> <[EMAIL PROTECTED]>
> lirc_mceusb2: debug mode enabled
> lirc_mceusb2: usb probe called
> usb 6-2: reset low speed USB device using uhci_hcd and address 3
> lirc_mceusb2: inbound and/or endpoint not found
> usbcore: registered new interface driver lirc_mceusb2
>
> Since I had a guess about usbhid, I tried to unload usbhid, and load
> lircmceusb2, and the result is something like a " lirc_mceusb2: found
> inbound .." followed by a nice oops.
>
>>
>> > mode2 cant find the /dev/lirc device. I tried to mknod the device and
>> > mode2 still dont find it.
>> >
>> > while booting I'm seeing this on dmesg:
>> >
>> > input: Shuttle Inc VFD Module as /class/input/input6
>> > input: USB HID v1.11 Keyboard [Shuttle Inc VFD Module] on
>> usb-0000:00:1d.2-2
>> > drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt
>> endpoint
>> > input: Shuttle Inc VFD Module as /class/input/input7
>> > input: USB HID v1.11 Device [Shuttle Inc VFD Module] on
>> usb-0000:00:1d.2-2
>>
>> You can also use the dev/input driver for lirc, there is a page on the
>> wiki about this.
>
> I used dev/input before for a bttv card. I did a minimal test here
> trying to cat /dev/input/evenX > file, and pressing keys on remote,
> but only got a empty file. I will try the proper lirc dev/input thing.
> But since the hid-core is complaining about the endpoint i dont have
> much hope.
Duncan
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
