OK so this may be sort of off-topic ish but ....
I was reading through the mail list archive about how to monitor bandwidth
usage on a per VS basis. The 'ipchains' method described in response to Zen
Woo's question seems to work OK but the access figures in bytes seem to
increase much more than you would expect (e.g doing 2 simple pings to the VS
of 64 bytes each (from Win 2000) brings the input and output figures up by
120 bytes!)
Is this normal?
I'm doing the following...
"ipchains -N vsoneio
ipchains -I input -j vsoneio
ipchains -I output -j vsoneio
ipchains -A vsoneio -s 192.168.0.68/255.255.255.255 -p all
then
ipchains -L -v --exact
to view info.
Thanks in advance,
----
Ben Kennish
Software Engineer
Fubra Limited
web | www.fubra.net
email | [EMAIL PROTECTED]
phone | +44 (0)870 1222 600
fax | +44 (0)870 1222 699
