Kevin, If you have versions 4.x or 5.0, you can turn on the Page Info check from the Imposition tab in the Compose dialog, the template file name will be printed at the bottom of the imposed sheet (or a regular page without imposition). In imposed jobs, the slug field overwrites the file name, so you would not want to put anything in the slug field.
Hope this helps. Ching Yue Printable Technologies -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Monday, November 12, 2007 9:15 AM To: FusionPro Users Forum Subject: [fusionpro] Re: Slug as filename automatically? On October 17, 2007 Kevin asked.... > I'd like to be able to make the slug automatically use the filename > text. Is this possible? Or is there something similar I can do, > where I don't have to modify the FPI file every time? This would > really help a lot since I do a lot of different jobs using the same > template and imposition, but different data. Lately I've just been > opening the FPI file in notepad and changing the slug text right > before I compose. It would be really nice to have it done automagically though. > > Thanks, > Kevin Has there been answer for this question? I too would like to place either a file name or another variable that could be passed in the data file in the slug line. We do a lot of printing on pre-printed shells, and it would be helpful for our bindery/fulfillment center to have some way of seeing which print job goes with which order. Currently we print a separate header sheet, but I would like to get away from that if possible. David A. Sweet Web/Graphic Designer HKM Direct Market Communications +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- FusionPro 5.0 Now Available! Variable text on a curve and soft drop-shadows for variable text LIMITED TIME upgrade offer of $299 per license for current customers: http://fusionpro.printable.com/store/upgrade New licenses available for $599 each at: http://fusionpro.printable.com/store/ All FusionPro 5.0 customers to receive FusionPro 5.1 with Adobe Acrobat 8 and InDesign CS3 support when released for FREE. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com -- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- FusionPro 5.0 Now Available! Variable text on a curve and soft drop-shadows for variable text LIMITED TIME upgrade offer of $299 per license for current customers: http://fusionpro.printable.com/store/upgrade New licenses available for $599 each at: http://fusionpro.printable.com/store/ All FusionPro 5.0 customers to receive FusionPro 5.1 with Adobe Acrobat 8 and InDesign CS3 support when released for FREE. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
