Trying this question again, I only recvd 1 answer from [EMAIL PROTECTED] which stated "select booklet maker on the Konica 6500 and then choose to insert sheet from tray whatever". I can't do this because we don't have the booklet maker for the KonicaC6500. However I did use the "exception page" functionality on the printer (not the Creo Rip) which let me set Tray 4 to be used for pages 1-2 and Tray 5 to be used for pages 3-6. The problem with this setup is you have to send the KonicaC6500 one record (one job at a time) and this takes forever. After grueling hours trying to understand the PPD file codes and printing numerous documents to file to get the postscript codes for tray calls and duplex this is what I came up with......
Plain.ps file: %SCIPPD: DFE Duplex Head2Head %SCIPPD: DFE MediaType Plain %SCIPPD: DFE Weight 75_80gsm %SCIPPD: DFE ForceTray Yes %SCIPPD: DFE InputSlot Tray4(PF-601) Color.ps file: %SCIPPD: DFE Duplex Head2Head %SCIPPD: DFE MediaType ColorCopy %SCIPPD: DFE Weight 75_80gsm %SCIPPD: DFE ForceTray Yes %SCIPPD: DFE InputSlot Tray5(PF-601) This will duplex the job but not pull trays except for the first record only after that the stock all comes from Tray5. It seems as if the CreoRip doesn't understand the true concept of dynamically pulling stock from different trays in a print stream. Can anybody help me on this? Trying to get help from Creo or Konica on this matter is like trying to call the planet Mars with a " Dick Tracy" radio wristwatch. $$$$$$$$$ For Printable personnel Mark, Dan, Alex, Lauren, Ching, anyone see below ..... I'm desperate Also if anyone from Printable is listening can we please come up with a better way for FusionPro to interface with various PPD files to make the tray pull process much easier. I would love to help in the design interface. It's crazy that pulling trays in HP PCL language is so much easier than postscript due to all the various flavors out there in the print arena. ****Printable why not try HPPCL as an output stream??****** Anyone from Printable can you also modify FusionPro so that when selecting PDF mode for output doesn't "gray out" the selection for choosing a printer to output to, believe it or not alot of the new printers can accept a PDF file as input as well as a postscript file. $$$$$$$$$$$ Thank you all for reading my long email but I need help and help fast. Cody Williams -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 30, 2008 4:35 PM To: FusionPro Users Forum Subject: [fusionpro] Tray Pulls on the Konica C6500 Creo IC-304 Rip Hello Everyone, Just starting to use FP 5.1 on windows paltform with Acrobat 8.1 and I have a job in which I need to pull paper from 2 different trays. I've read previous post on this matter but none seem to help when dealing with the Konica C6500 Creo IC-304 rip. If anyone knows how to do tray pulls using this printer please let me know: 1. Do postscript.txt files go before or after a page call? 2. Does every page need a media call if job is duplex? 3. Does anyone have the proper code. 4. Printable how can you make this process easier (I'm more than willing to send you all a variety of PPD files so you can come up with a visual print interface). Thanks in Advance for any and all help Cody Williams +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- FusionPro 5.0 Now Available! Variable text on a curve and soft drop-shadows for variable text LIMITED TIME upgrade offer of $299 per license for current customers: http://fusionpro.printable.com/store/upgrade New licenses available for $599 each at: http://fusionpro.printable.com/store/ All FusionPro 5.0 customers to receive FusionPro 5.1 with Adobe Acrobat 8 and InDesign CS3 support when released for FREE. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com -- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- FusionPro 5.0 Now Available! Variable text on a curve and soft drop-shadows for variable text LIMITED TIME upgrade offer of $299 per license for current customers: http://fusionpro.printable.com/store/upgrade New licenses available for $599 each at: http://fusionpro.printable.com/store/ All FusionPro 5.0 customers to receive FusionPro 5.1 with Adobe Acrobat 8 and InDesign CS3 support when released for FREE. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
