Cody,
This sounds like you are trying to print directly to the Creo rip?
I work with a Konica Minolta 650 & Creo Rip and have fusion pro
4.2P1d on a mac - All of my VDP jobs to this device only get good
results with the Milti-File.vps output options.
What we always do for this rip is send it Multi-File.vps to it. What
I mean by "send it" is to have fusion pro print the multiple files to
a folder selected by you during the output process in fusion pro,
then copy the folder and all of it's contents to the Creo Rip over
network or physically taking a disk to it. The next step we do is
import the .vps file made from fusion pro at the Rip interface -
there is a menu at the top called import.. Depending on the type of
FP Imposer imposition used during the output the file can become a
booklet after importing at the rip. So maybe take a look at the FP
Imposer that comes with Fusion Pro. The rip is not able to impose a
double sided VDP job - we found this out the hard way too. So, with
your FP imposer you can create an imposition that works for your job.
After importing that at the rip it should be able to tell you that it
is a booklet (your KonicaMinolta does not have to have the booklet
maker addon to it for this to work) and then in the RIP itself in
your job parameters under extras and then to another tab called mixed
media, for your job you can tell it to pull the even or odd pages
from whatever tray you need.
Sorry this is not a clear step by step process, but I do hope this
helps point you in the right direction.
Matthew
[EMAIL PROTECTED]
On May 12, 2008, at 9:19 AM, Cody Williams wrote:
Trying this question again, I only recvd 1 answer from
[EMAIL PROTECTED] which stated "select booklet maker on the Konica
6500 and then choose to insert sheet from tray whatever".
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
FusionPro 5.0 Now Available!
Variable text on a curve and soft drop-shadows for variable text
LIMITED TIME upgrade offer of $299 per license for current customers:
http://fusionpro.printable.com/store/upgrade
New licenses available for $599 each at:
http://fusionpro.printable.com/store/
All FusionPro 5.0 customers to receive FusionPro 5.1 with
Adobe Acrobat 8 and InDesign CS3 support when released for FREE.
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
--
Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED]
--
View FusionPro Knowledge Base, FusionPro Samples at
www.printable.com/vdp/desktop.htm
--
You are currently subscribed to fusionpro as: [EMAIL PROTECTED]
To unsubscribe send a blank email to [EMAIL PROTECTED]
--
--
Note: All e-mail sent to or from this address will be received or otherwise
recorded by the e-mail recipients of this forum. It is subject to archival,
monitoring or review by, and/or disclosure to someone other than the recipient.
Our privacy policy is posted on www.printplanet.com
--
