Jeff, Although you might have better luck producing the PPML file, you won't see a significant improvement in RIP times on the press unless you have HP's production Manager or offline multiple RIPs. PPML as Mark mentioned earlier, will only really benefit you by taking advantage of the increased firepower of multiple RIPs.
We have had mixed results with JLYT with Fusion Pro. What we eventually ended up deciding, was there were files that ripped fined as JLYT and for some reason, there were jobs that did not. It was those jobs we just went through the time necessary to RIP the PDF. We have recently purchased the HP Production Manger (2 node) and run almost all PDFs with great luck. Let me know if this helps or you need additional information. I agree with you on the Print Fusion and we wouldn't go back to YTD. Rob ------------------------------------------------------------------------ - Rob Seaver | VP Business Development The ADAM Group | TAG Marketing and Recruiting(tm) | Home Care >> Hospice 866.232.6477 | F: 866.232.6470 | www.yourreferralconnection.com -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
