On May 26, 6:40 pm, [email protected] wrote:
> Hello all !
>
> I'm reposting this question because I really need to know how I can
> get this puppy up and running again. My wife's Pismo (30GB HDD, 1GB
> RAM, 400mhz cpu ) is not charging off of the power brick consistently
> anymore... if I wiggle the cord leading from the brick to the laptop,
> it will recognise the charger for a while but I don't know how to
> determine if it is the cord or the power supply coupling on the
> Pismo, any insight is greatly appreciated
>
Wiggle it some more ! Where in is the point where wiggling works ?
Is the plug tight or loose ? is the power jack itself loose (that is
on the pismo where you plug in the cord, push around on it without the
cord plug in)
if the plug is loose squeeze it with pliers, if the cord has a bad
spot cut that out.
This comes from experience with two flaky pismo type adapters ! I also
have two monitors with flaky cords I have taped/ tied up to work
although occasionally I have to fuss with them.
If you don't want to go to all this hassle, check the jack at least
before you buy a new adapter.
The power in board is about $30 on ebay but requires nearly complete
disassembly to install. I picked up a couple power supplies for $5
each (sorry can't sell due to cord issues).
> Thanks,
> Steve
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to Low End Mac's G-Books
list, a group for those using G3 iBooks and PowerBooks (we run a separate list
for G4 'Books).
The list FAQ is at http://lowendmac.com/lists/g-books.html and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/g-books?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
