I installed a 4 port USB card (cheap one, has a chip labelled 'Agere') into a CW Boston mac clone. I had the same problem as you, that it would have an error 11 on startup with the USB adapter card drivers installed. If I removed the 'USB support' extension (I think it was) or the card, it would boot okay. The card is labelled as being mac compatible, but that it needs a G3 or better. Perhaps it requires PCI bus rev. 2.1 (only in beige G3 and later).
So I will try the card in my 7600 and my beige G3. I have USB card drivers 1.5.6 which came with OS 9.2.2. What is the chip on your card? Peter > > Oh, and BTW did I mention that this error 11 is during the march of > extension icons during boot up and the Sys hangs and will not continue > to boot ? The only way to get it to boot to 9.x is to remove the card > completely. > > .... But X on TOH is entirely happy with the card and could care less. > Andy3 > -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
