Albert, You might try removing just the front part of the tray (should just be clipped on, check it from the underside while tray is ejected) that mates with the face of the CD-RW when closed. No Dremel needed. Mine comes right off (have a LaCie/Matshita CD-RW as well in my B&W). Good luck.
Al Hutchinson <<<<<<Date: Fri, 03 Jan 2003 13:52:49 -0500 From: Albert W D'Amanda <[EMAIL PROTECTED]> Subject: Advice: B&W Bezel Plate hitting CD-RW Drawer Message-id: <[EMAIL PROTECTED]> Hello All I have seen some posts in the past on this "problem" Just installed a LaCie internal IDE CD-RW into my B&W Yosemite When I go to close the CD-RW drawer , the lower edge of the tray catches the bottom of the (top ) bezel plate Temporary fix : I have removed the spring from the top bezel plate. Manually push it back after tray closes. But would like a permanent fix Can anyone tell me how and/or what I have to grind off to make it work ? thanks to all that reply BTW: I do have a Dremel tool kit Albert B&W Yosemite V1 // XLR8 G4 500/ 1MB ZIF // 1024MB RAM OS X.2.3>>>>>> -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
