I don't know if this is still a problem, but with the 10.1 installer, it wouldn't work with two cards in place that use the same drivers. Pull one or the other of your ATI cards out and try the install. The one you keep should be in the 66 MHz slot.
If you're really committed to having them both, put the second one back in after the install. Just curious, but why do you need them both? Are you using 3 monitors? As to whether the 128 is supported, yes, they are and work just fine. That was the stock card in the B&W. On Wednesday, January 8, 2003, at 04:31 PM, joe w runnels wrote: > Ok, I got the rev. 2 MB couldnt find a ata 100 hdd controller, BUT the > OSX installer always gives me the "you need to restart your mac" error > during the install, everytime, it is a blue and white Rev2 machine 1024 > MB of RAM, 30 gig IBM deskstar 7200 RPM hdd and original 6 Gig MAxtor, > DVD rom, ZIP 100, Radeon 7000 in 66 Mhz PCI slot and a Rage 128 ith DVD > decoder in the PCI slot below the radeon... -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
