In a message dated 2/7/03 11:58:37 AM, [EMAIL PROTECTED] writes: << I just got my G3-300MT and have a couple of questions.(PeterH, wherefore art thou lurking? ):=) >>
I'm here. ;-)))) >> Will the Revision 3C Romm chip from my 266DT work on a Revision 1 logic board? >> Yes, as to providing Master and Slave EIDE support. Probably, with respect to support of the Rage II+DVD chip (although that ROM is intended to support, and indeed it includes support for the Rage Pro chip). >> Someone farkled with it. It has a RageII+DVD chip on it. >> Surprise, surprise, surprise! >> My 300 tower is configured as follows: ATA bus 0= ATAPI 24X CD SCSI Bus 1= Quantum Viking 4GB HDD ID=0, driven off SCSI card SCSI Bus 0= 100 MB Zip ID=5, driven off MOBO SCSI connector In PCI slot $A1= Atto SCSI card,Apple 53C875, Model#NCR 875- driving the HDD. The card also has a 68 pin external connector. If swapping theRomm chip will work, I want to swap my ATA drives (2) from my DT to the MT. >> Should be no problem. >> I may have to move the 4MB VRAM upgrade also. I might swap the Ram around also, if they are the same height. >> Fine. If you're swapping TO the DT, the MT's SDRAM probably won't fit. In this case, just mash down on the MT's fan's finger guard, or do as I did and remove the entire guard ... it was a remnant from the "7500 Case", anyway. -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
