In a message dated 2005-01-31 10;48;56Nite, [EMAIL PROTECTED] writes: << You will need to remove the jumper block on the motherboard and place individual jumpers to set the speed. See: >>
Not true from my experience. You can push the metal parts out of the jumper block and rearrange them to how you want them to be. I have made a chart for the beige with all possible settings, since I have been using one as my main computer for a few years now. If you want the chart just let me know. Also, your 300MHz ZIF may run at 333. Nobody ever says a fan is a good idea for overclocking G3s, but I say it is. Anyway there are other bus speeds you can run the computer at, I hear its of little benefit, but you could, say, run your 300 at 315 if 333 doesnt work Chris -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
