My Reply follows quote. On 07/01/2006 13:44 [EMAIL PROTECTED] said: >Ken <[EMAIL PROTECTED]> wrote: > >> >I have a beige G3 that I bought used. When I received it it had a >>>20GB hard drive as well as a 2GB hard drive that apparently became >>>disconnected in transit. I didn't need it so I left it alone until >> >yesterday, when I wanted to install more RAM and a 1GB Jaz drive. >>> >>>I can't get the machine to recognize the Jaz drive. It does see the >>>2GB HD, which is connected to the same ribbon cable and the same >> >power cable (there are two connectors on each). >> >>Since both devices are on the same SCSI bus, make sure they have >>different IDs. Check termintation also. > >I thought of the SCSI ID, but I didn't see anyway to change the ID on >either the Jaz drive or the HD. > >How do I check termination? ---------- There should be a set of jumper blocks on each drive, usually near the ribbon connector. Part of the jumper block is usually for ID and part for termintation. Without knowing anything about either drive, I can't guess more than that.
Ken -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:g-list@mail.maclaunch.com> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
