How havew you connected your SCSI HD? Mel
--- On Sun, 11/23/08, MnDel <[EMAIL PROTECTED]> wrote: From: MnDel <[EMAIL PROTECTED]> Subject: SCSI HD partly recognized? To: "G3-5 List" <[email protected]> Date: Sunday, November 23, 2008, 5:40 AM Hello, just joined this group... On my G4 Sawtooth I have internally 2 ATA drives and one SCSI. Some months back I swapped out one of the ATA's for a bigger drive - and must have done to something to the SCSI. It no longer shows up on the desktop, or Disk Utility; but in System Profiler I see this, (below) but no more. I have disconnected and reconnected twice - but see no change. Any ideas what I should try next? thanks ------------------------------------------------------------ SEAGATE ST318203LW: Manufacturer: SEAGATE Model: ST318203LW Revision: 0002 Target: 1 SCSI LUN: 0 ------------------------------------------------------- --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
