On Nov 24, 2008, at 9:19 AM, MnDel wrote:
> > > Thanks, 4 replies already , what a group! > I took out card and reinserted, same with ribbon to HD, but no change > Ribbon comes off top of card and SCSI HD is connected at the first > connector >> What OS version? 10.3.9 >> What model of SCSI controller? > > ADPT,917306-01: > > Name: ADPT,2940UW > Type: scsi-2 > Bus: PCI > Slot: SLOT-D > Vendor ID: 0x9004 > Device ID: 0x8178 > Revision ID: 0x0000 I have a SCSI drive connected to an ATTO PCI Express PSC and it requires an Active Terminator on the SCSI ribbon. Yours require that? Active internal termination? Is it still good? Mine lights up when the the system is on. For SCSI problems, you might check with, as if you wanted to buy something (like another Terminator): http://www.mcpb.com/ Give them all your system details along with the SCSI setup, and they'll recommend what you need. You can then run through a check of your SCSI line. They helped me get my 80 to 68 pin type scsi drive going with these two adapter and terminator items: SCA2 8OPin To 68Pin LVD Rated ADAPTER TMA-I3HDB-68F Not the exact same problem ... but SCSI related just the same. Still works. Bill Connelly artsite: http://mysite.verizon.net/moonstoneartstudio myspace: http://www.myspace.com/moonstoneartstudio --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
