Greetings ( + )!( + ) Another thing that I do and you might try is to "Open" and "Keep" open the "Activity Monitor" application. If your problem is an application. it will allow you to see which program is using all of the processor time, and will also indicate which one is not responding.
Best regards, Harry San Jose, Ca On Dec 16, 12:29 pm, norm46 <[email protected]> wrote: > Shut down or restart does not work with software. > Hardware Overview: > > Model Name: Power Mac G4 > Model Identifier: PowerMac3,3 > Processor Name: PowerPC G4 (3.3) > Processor Speed: 1 GHz > Number Of CPUs: 1 > L2 Cache (per CPU): 256 KB > L3 Cache (per CPU): 2 MB > Memory: 1 GB > Bus Speed: 100 MHz > Boot ROM Version: 4.2.8f1 > Serial Number: XB0471L7J3B > Sales Order Number: M7891LL/A > I must shutdown with the front switch or restart with the restart > switch. This was happening with OS 10.5.5 so used the OS 10.5.6 comb > updater thinking the problem would go away. It did not. Have run disk > utility from the install disk.Problem persists Any ideas? I did a nuke > and pave about a month ago. > Norm --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
