Shut down or restart does not work with software.
Hardware Overview:
Model Name: Power Mac G4
Model Identifier: PowerMac3,3
Processor Name: PowerPC G4 (3.3)
Processor Speed: 1 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: XB0471L7J3B
Sales Order Number: M7891LL/A
I must shutdown with the front switch or restart with the restart
switch. This was happening with OS 10.5.5 so used the OS 10.5.6 comb
updater thinking the problem would go away. It did not. Have run disk
utility from the install disk.Problem persists Any ideas? I did a nuke
and pave about a month ago.
Norm
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs - with a particular focus on
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
