>> You need to look at the Grackle chip on the motherboard to see if it > can support the 83MHz bus speed.
It is the 66 MHz, but it has run rock solid for months, until I used one L2 enabler (I do not recall which). > How did you know the L2 was bad? OS X reads "0" and I have never been able to enable it. BTW, I went back to the default 266/66 configuration and still the same problem: is it possible that the last L2 enabler that I used (I believe it was under OS X) has flashed some firmware or else? Ben --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
