On 6/1/09 10:58 PM, Bruce Johnson of [email protected] sent
>
>
> On Jun 1, 2009, at 7:52 PM, Brian Rule wrote:
>
>>
>> I'm reluctant to say its the RAM, I have that same RAM now installed
>> in my B&W and it's running perfectly.
>
> The B&W is running at 66MHz, the Quicksilver is 100 MHz.
Are these the clock settings for the RAM slots only (i.e. Not the system bus
speeds, which are 100MHz for the B+W and 133MHz for the QS, iirc)?
Just curious,
Dana
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs - with a particular focus on
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---
