On Jun 7, 2009, at 11:55 AM, Brian wrote:

>
> Well, in order to diagnose the bad RAM I used this same drive and
> tiger partition to boot the quicksilver several times over the past
> week, and it worked fine when installed as the master drive.  The only
> problem seems to come about when I try to boot it as a slave drive.


According to my PowerMacG4SU.pdf manual (which you can download from  
Apples site), the drives may need to be set as Cable Select, and not  
Master/Slave, as long as you have an Apple Cable Select cable (its  
the short one that appears to have a slice cut out about an 1/8 inch  
long, 1 wire wide).

 From the manual:

Installing Ultra ATA Drives
Your Macintosh can accommodate two internal 1-inch-high ATA devices  
in the U-shaped drive
carrier in drive position 3 in the computer. If your computer has one  
Ultra ATA device, it sits
in the lower portion of this U-shaped drive carrier. You can install  
a second ATA device in the
upper part of the carrier.
Note: Contact your device manufacturer or consult the manufacturer’s  
website to
determine if your device is set for cable select mode. Before  
installation, set the device to
cable select mode if the manufacturer hasn’t already done so.

Maybe that's the problem ...

Disclaimer: Not a Guru here ... just a friendly Guesser ...

Bill Connelly
artsite: http://mysite.verizon.net/moonstoneartstudio
myspace: http://www.myspace.com/moonstoneartstudio




--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a 
group for those using G3, G4, and G5 desktop Macs - with a particular focus on 
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---

Reply via email to