Make sure that all the connections are clean. Then when you have the new processor in, as soon as you here the apple chime, hold down: command(the one with the apple) + options + P + R. The computer should restart again and you should here it chime again. Let it chime 3 or 4 times and then let up and see what happens. -Jonas
On Thu, Jul 16, 2009 at 6:13 PM, DAN A CURRIE <[email protected]>wrote: > > Hello All and Lady Witt, > > I am wanting to upgrade my children's (my old) G4 MDD 1.25 Dualie, 2 GB > RAM, 3 HD, OS10.5.4 to the 1.42 Ghz Dual processors and heat sink. > > The buss speed is 167 so I should have had no problems. > > However, when I swapped the processors, heat sinks (big brass one), > pressed the cuda button and then powered up and I got the "boing" but > the monitor did not display anything. I tried again and still the same, > I then put everything back as it was and it started just fine and is > running now. > > What did I get wrong?? > > Dan II > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
