On Jul 20, 2009, at 9:16 PM, Bill Connelly wrote: > > On Jul 20, 2009, at 2:35 PM, Bill Connelly wrote: > >> DA Dual 533 Leopard 10.5.7 >> >> AGP1 GeForce4 MX >> PCI2 empty >> PCI3 Firmtek Seritek SATA with 1TB Seagate >> PCI4 empty >> PCI5 empty >> >> When I unplug my DA (after turning off my power strip), to duck a >> (recent) passing electrical storm, upon plugging it back in (and >> turning on the power strip), it immediately powers up as if I pushed >> the Power Button on front of the tower. It did this before ... can't >> remember if I had the Firmtek card in or not (believe so). >> >> I checked under System Preferences > Energy Saver > Options and I do >> not have "Restart automatically after a power failure" checked. >> >> Peculiar to this G4 model? or just my cpu upgraded one? > Seems to be happening again. Turn Off Power Strip > Unplug Strip, then in reverse order, and the DA comes on.
The CUDA press fixed it once ... but its back. Any thoughts? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com To unsubscribe from this group, send email to g3-5-list-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---