On Aug 29, 2009, at 11:41 PM, Stephen Conrad wrote:
> > On Sat, Aug 29, 2009 at 9:47 PM, Bill Connelly<[email protected] > > wrote: >> >> I happen to have a WD 60GB IDE drive, and it was functioning alone >> with Cable Select (1,2) set (pair closest to the power in) ... The >> other jumpers were used for the Master (5,6), Slave (3,4) and Single >> (none). >> >> Hmmm ... wonder if you should be using Cable Select when it is >> alone ... if Single doesn't work, I'd try CS next. > > Hmmm, might have to try that. > However, I want two HDs in this thing :) > > It boots off the new HD when the old HD is there but not otherwise. > Why wold that happen? I'm guessing the WD works well as Master, but only with a Slave drive. Alone, it might need to be set as CS or Single. Good Luck with the others ... maybe each set as Slave along with the WD? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list -~----------~----~----~----~------~----~------~--~---
