On Sat, Aug 29, 2009 at 10:51 PM, Bill Connelly<[email protected]> wrote:
>
>
> On Aug 29, 2009, at 11:41 PM, Stephen Conrad wrote:
>
>>
>> On Sat, Aug 29, 2009 at 9:47 PM, Bill Connelly<[email protected]
>> > wrote:
>>>
>>> I happen to have a WD 60GB IDE drive, and it was functioning alone
>>> with Cable Select (1,2) set (pair closest to the power in) ... The
>>> other jumpers were used for the Master (5,6), Slave (3,4) and Single
>>> (none).
>>>
>>> Hmmm ... wonder if you should be using Cable Select when it is
>>> alone ... if Single doesn't work, I'd try CS next.
>>
>> Hmmm, might have to try that.
>> However, I want two HDs in this thing :)
>>
>> It boots off the new HD when the old HD is there but not otherwise.
>> Why wold that happen?
>
> I'm guessing the WD works well as Master, but only with a Slave drive.
>
> Alone, it might need to be set as CS or Single.
>
> Good Luck with the others ... maybe each set as Slave along with the WD?
I tried the Samsung as Slave with the WD as Master.
I could not get the G4 to boot
--
Steve Conrad
Henrietta, MO 64036
"The time has come for mankind to grow up and leave its cradle behind;
to go forth and claim our place in outer space."
- Capt. Henry Gloval
(\__/)
(='.'=)
(")_(")
Help Bunny Take Over The World!
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/g3-5-list
-~----------~----~----~----~------~----~------~--~---
