If you can add more memory you should do that... On these older machines I always would max out the memory... But in your case if you are running 2G then I think this is more than enough for what you are running??? Unless all those firewire ports you added could be the trouble??? Can this computer run the 800's, are they compatible??? If everything was running good in the 867 then it should be ok in the 1.25, maybe uninstall the 800 firewire's and see how it is??? Did you run this 1.25 before you transferred all the stuff from your old computer??? How about the keyboard and mouse were they from you old machine are from the new one??? I would switch them too if not... Hopefully someone else has more on this??? I can't think of anything else right now??? CoolKat
-----Original Message----- >From: mkehoe <mirake...@gmail.com> >Sent: Oct 24, 2009 1:30 PM >To: G-Group <g3-5-list@googlegroups.com> >Subject: What makes mouse/keyboard freeze up intermittently? > > >I recently moved all my internal drives from a G4 MDD dual 867 mHz to >another power mac G4 (MDD dual 1.25 mHz). I installed a PCI card with >a 400 FW port, and two 800 FW ports, and added one additional memory >stick, bringing the memory up to 2G. We have 500G and 750G hard >drives in the ATA 100 bus, and two 160G drives in the ATA 66 bus. > >We have occasional freezes of both the cursor (mouse) and keyboard; to >turn off the computer we then have to use the power button on the >tower. > >Could this be a memory issue? I downloaded memtest, but want to get >some ideas from this group before I proceed. I still have my G4 dual >867, so I could take memory from that computer if needed, as I know >that worked. > >Could it be an issue of heat? > >Any ideas appreciated... > > > > >> --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list -~----------~----~----~----~------~----~------~--~---