On Nov 11, 4:37 pm, Jasiu <[email protected]> wrote:
> Couple of questions. How do I tell whether it is a rev 2 or not? How
> do I take out the hard drive? I took out the small screw to the right
> but it still is fastened somewhere. How difficult would it be to put
> another faster processor in there? What is the latest OS that I can
> run?
>
> Thanks
Greetings,
The best way to make sure you're getting a Rev. 2 motherboard is the
"402" marking on the CMD646 IDE controller chip.
As far as removing the hard drive there should just be one screw
holding the bracket in place. That screw is the front of the
bracket. You have to unplug the drive to see the screw. Remove the
drive and bracket and there should be four screws holding the drive
and bracket together.
Replacing the processor is easy. Here is a link:
http://www.xlr8yourmac.com/G4CARDS/XLR8_G4_400Z/index.html
The B&W G3 can run up to OSX.4.11
Hope this helps,
Lee
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/g3-5-list
-~----------~----~----~----~------~----~------~--~---
