Howdy, It sure sounds like a dirty fuser. On a different model Laserjet, I solved a similar problem by cleaning the fuser wire. Is your fuser wire exposed, so you can run a cotton cloth down it? They are pretty fragile, so you want to do that with a light touch. Good luck, Ralph
On Wed, 2009-12-02 at 14:50 -0500, Dan wrote: > Hi, > > Hoping someone can point me here... > > Our LaserJet 4100n is having some print problems -- light areas on > the pages, schmutzy dots, some light vertical bars. > ... That remaining bar is about 1/8" wide, 3 > 3/4" from the right edge of the paper; light but annoying. It's > "quality" has not changed at all, during the last couple of cleanings. > > What should I try next? Is this a fuser problem? -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list
