---------- Original message ---------- Subject: Re: Dead processor? Date: Sunday, 19. June 2011 From: peterh...@cruzio.com To: g3-5-list@googlegroups.com > Thee raw board is the same between the dual 800 MHz and the dual 1.0 GHz. > > The voltage regulators, and some other parts, are completely different. > > The pads which are empty on the 800 MHz are filled on the 1.0 GHz, and > vice versa.
Yes, that also what I saw. But the board is otherwise very similar. It makes sense that some parts like resistors and voltage regulators are different. Do you know how to update the firmware on a Quicksilver? Thanks, Andreas aka Mac User #330250 -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list