in my experience with my sawtooth, a usb2 card with the NEC chip works--but other usb cards from my parts bin with other mfr's chips don't work. the mfr of the chip is silkscreened onto the chip.
ken On Jun 30, 9:21 am, rbridge <[email protected]> wrote: > I've upped RAM to 1Gb, OS is up to 10.4.11, and I'm trying to support > Eyeball 2.0 Webcam/mike pkg by speeding up the USB to 2.0. I added a > generic USB 2.0 PCI card with four ext and one int. port, but the > machine doesn't seem to acknowledge it...still no action at the > webcam, unless I plug it into one of the two older USB 1.1 > ports...they see the camera but operation is sporadic and the video > shuts off quickly. Am I doing something wrong? Is my USB card maybe > only for PC? Do I need a driver for the new USB 2.0? > > If it works at some point, do I end up with "two USB buses"? That is, > one at 1.1 for the keyboard plugs on the original rear panel, and a > 2.0 bus at the four new PCI plugs...? Any help much appreciated... > > Bob Bridge > St. Peter's NS, Canada -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list
