Il giorno 16/02/14 11.36, "geraldcornish" ha scritto: > Problem disk does not show up, tried several firewire cables & > alternate disks, zapped pram, all to no avail. Sounds like an hardware problem (either the port or the FW chips), but wait for more informed opinions before getting worried. ;-)
> installed 10.4.3, With didn't you install the 10.4.11 update? That could contain some drivers or stuff that make the FW ports running as they should. > Is the firewire 800 link separate from 400? > System profiler only states "up to 800 Mb/sec" and then only after > much wheel winding. > Maybe a 6-9 cable will get me firewire? If the problem is with the 400 port, then the 800 might work. Since a 400-to-800 FW cable should be relatively cheap (and always handy), I'd give it a shoot. -- -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list --- You received this message because you are subscribed to the Google Groups "G-Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to g3-5-list+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
