rob, i had exactly the same symptom. GBPro would consistently run about a week and simply stop. no logging, no packet processing, nothing. i could not afford the time to troubleshoot down to a component and swapped the complete machine with a known good Dell including all three 3com nics. same problem. the only hardware that was reused was the dongle key.
i recently upgraded to GBFlash (with the same dongle) and anxiously await for the first week to pass. you are the first i've heard with a similar problem. i'll let you know if the flash makes any difference. bryan -----Original Message----- From: Rob Genovesi [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 21, 2002 5:59 PM To: [EMAIL PROTECTED] Subject: [gb-users] GB Pro crashes Hello All, My GB Pro (v3.2.4s) seems to be crashing fairly often (once a week) and it's time to try and figure out what's causing the crash. I have syslogging turned on, but I am not seeing any messages there other than the typical filter alerts. Is there a way to collect more data so I can try and figure out what's happening? Much thanks, Rob Genovesi [EMAIL PROTECTED] ----- GB Pro v3.2.4s - here's the hardware output from the web interface GNAT Box #324: Sun Feb 17 03:28:54 EST 2002 [EMAIL PROTECTED]:GBPRO Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 132873625 Hz CPU: Pentium/P54C (132.87-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 50331648 (49152K bytes) avail memory = 42999808 (41992K bytes) Intel Pentium detected, installing workaround for F00F bug md1: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0x1020-0x103f irq 11 at device 3.0 on pci0 ed0: address XX:XX:XX:XX:XX:XX, type NE2000 (16 bit) isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <Intel PIIX3 ATA controller> at 7.1 pci0: <Cirrus Logic GD5436 SVGA controller> at 15.0 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <3 virtual consoles, flags=0x300> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold rb0: <dongle> on ppbus0 ed2 at port 0x300-0x31f iomem 0xcc000 irq 5 flags 0x4 on isa0 ed2: address XX:XX:XX:XX:XX:XX, type NE2000 (16 bit) NAT: Initialized IPsec: Initialized Security Association Processing. Mounting root from ufs:/dev/md0c --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
