What emulation are you using? If you get the login prompt OK, then it sounds like your baud, parity, and stop bits are set right, but that you are not using VT100 emulation.
Mike Burden Lynk Systems http://www.lynk.com (616)532-4985 [EMAIL PROTECTED] > -----Original Message----- > From: Rob Genovesi [mailto:[EMAIL PROTECTED]] > Sent: Thursday, April 25, 2002 2:18 PM > To: [EMAIL PROTECTED] > Subject: RE: [gb-users] Contents of the GBFlash 3.2.5 Installer > > > Ok, one last question on this one (I hope). What are the > settings for the > serial connect? Baud rate, data bits, stop bits, flow control, etc. > > The standard 9600/8/N/1 doesn't seem to work. I'm getting > into the box, > but just garbage on the terminal... > > Thanks, > > Rob Genovesi > [EMAIL PROTECTED] > > > At 10:14 AM 4/25/2002 -0400, you wrote: > >If by "console server" you mean something that will act like > >a serial terminal, then yes. > > > >When you boot the GB-Flash using the "sio" image, the video > >will go blank after the level zero diagnostics (i.e., when > >the GNAT Box software begins the boot process). This is > >the point at which console is assigned to the serial port. > >If you have a serial terminal (or something emulating one) > >attached to the serial port, you will see the rest of the > >boot messages on that terminal. The serial terminal can > >then be used for administering the GNAT Box. > > > >Mike Burden > >Lynk Systems > >http://www.lynk.com > >(616)532-4985 > >[EMAIL PROTECTED] > > > > > > > -----Original Message----- > > > From: Rob Genovesi [mailto:[EMAIL PROTECTED]] > > > Sent: Wednesday, April 24, 2002 9:05 PM > > > To: [EMAIL PROTECTED] > > > Subject: RE: [gb-users] Contents of the GBFlash 3.2.5 Installer > > > > > > > > > Is there more information on the "sio" version anywhere? I > > > can't find it. > > > > > > Will this version allow me to hook the serial port of my > > > gbflash machine up > > > to a console server? > > > > > > Appreciate any further info on this. > > > > > > Thanks, > > > > > > Rob Genovesi > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > To subscribe to the digest version first unsubscribe, then > e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > Archive of the last 1000 messages: > http://www.mail-archive.com/[email protected] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/[email protected]
