Well, I answered my own question - just had to keep guessing.

Baud rate: 38400
databits/stopbits/parity: 8/1/none
flow control: cts/rts

Hope this info helps anyone else who might want to use the serial console.


-Rob

----

Ok, one last question on this one (I hope).  What are the settings for the 
serial connect?  Baud rate, data bits, stop bits, flow control, etc.

The standard 9600/8/N/1 doesn't seem to work.  I'm getting into the box, 
but just garbage on the terminal...

Thanks,

         Rob Genovesi
         [EMAIL PROTECTED]


At 10:14 AM 4/25/2002 -0400, you wrote:
>If by "console server" you mean something that will act like
>a serial terminal, then yes.
>
>When you boot the GB-Flash using the "sio" image, the video
>will go blank after the level zero diagnostics (i.e., when
>the GNAT Box software begins the boot process).  This is
>the point at which console is assigned to the serial port.
>If you have a serial terminal (or something emulating one)
>attached to the serial port, you will see the rest of the
>boot messages on that terminal.  The serial terminal can
>then be used for administering the GNAT Box.
>
>Mike Burden
>Lynk Systems
>http://www.lynk.com
>(616)532-4985
>[EMAIL PROTECTED]
>
>
> > -----Original Message-----
> > From: Rob Genovesi [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, April 24, 2002 9:05 PM
> > To: [EMAIL PROTECTED]
> > Subject: RE: [gb-users] Contents of the GBFlash 3.2.5 Installer
> >
> >
> > Is there more information on the "sio" version anywhere?  I
> > can't find it.
> >
> > Will this version allow me to hook the serial port of my
> > gbflash machine up
> > to a console server?
> >
> > Appreciate any further info on this.
> >
> > Thanks,
> >
> >          Rob Genovesi
> >          [EMAIL PROTECTED]
> >
> >
> >
> >


---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
To subscribe to the digest version first unsubscribe, then
 e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Archive of the last 1000 messages:
 http://www.mail-archive.com/[email protected]

Reply via email to