Firmware is v1.44.3 (Dec 2002) However, Linksys website shows that v1.44 (Nov 2002) is their current version.
When I try to create a tunnel based on the current IP address of the BEFSX41 and the GB-1000 (ie as per static to static arrangement) the BEFSX41 locks up and you need to cycle the power to get it going again...very annoying and frustrating. Probably a firmware problem - I will try downgrading the firmware to 1.44 I liked the Howansky solution to the Atwood problem...it needs a little extra mayo tho! Hamish Cant BATES SMART www.batessmart.com.au -----Original Message----- From: Alex Howansky [mailto:[EMAIL PROTECTED] Sent: Thursday, 27 February 2003 11:44 AM To: [EMAIL PROTECTED] Subject: RE: [gb-users] VPN between BEFSX41 + GB-1000 > Still having no luck with the VPN to BEFSX41 with dynamic ip (trying to keep > this thread on track...) Even when configuring it as a static? What firmware rev does your router have? -- Alex Howansky Wankwood Associates http://www.wankwood.com/ --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/[EMAIL PROTECTED] Important Notice. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person) you may not copy or deliver this message to anyone. In such case you should destroy this message and kindly notify the sender by reply email. Opinions, conclusions and other information in this message that do not relate to the official business of Bates Smart shall be understood as neither given or endorsed by it. In no event shall Bates Smart, its employees, contractors or any associates be liable for specific, indirect, or consequential damage or loss arising from negligence or otherwise, which may occur through transmission of the message and attachments. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/[EMAIL PROTECTED]
