https://gcc.gnu.org/g:f27255c85d52a66f72ff9d9926fd9ec1e3fc5538
commit f27255c85d52a66f72ff9d9926fd9ec1e3fc5538 Author: Michael Meissner <[email protected]> Date: Fri Nov 6 14:13:07 2026 -0500 Add initial 16-bit floating point support. This patch adds the initial support for the 16-bit floating point formats. _Float16 is the IEEE 754 half precision format. __bf16 is the Google Brain 16-bit format. In order to use both _Float16 and __bf16, the user has to use the -mfloat16 option to enable the support. In this patch only the machine indepndent support is used. In order to be usable, the next patch will also need to be installed. That patch will add support in libgcc for 16-bit floating point support. This patch also contains configuration options that determines if 16-bit floating point is supported by default in the compiler. In previous versions of the patches, this patch for the configuration options was a separate patch later in the series. 2026-11-06 Michael Meissner <[email protected]> gcc/ * config.gcc (powerpc*-*-*): Add support for the configuration option --with-powerpc-float16. * config/rs6000/constraints.md (eZ): New constraint for -0.0. * config/rs6000/float16.md: New file to add basic 16-bit floating point support. * config/rs6000/predicates.md (easy_fp_constant): Add support for HFmode and BFmode constants. (easy_vector_constant): Add support for V8HFmode and V8BFmode to load up the vector -0.0 constant. (minus_zero_constant): New predicate. (fp16_xxspltiw_constant): Likewise. * config/rs6000/rs6000-builtin.cc (rs6000_type_string): Add support for 16-bit floating point types. (rs6000_init_builtins): Create the bfloat16_type_node if needed. * config/rs6000/rs6000-c.cc (rs6000_target_modify_macros): Define __FLOAT16__ and __BFLOAT16__ if 16-bit floating pont is enabled. * config/rs6000/rs6000-call.cc (init_cumulative_args): Print more debug information if -mdebug=arg. * config/rs6000/rs6000-cpus.def (POWERPC_MASKS): Add -mfloat16. * config/rs6000/rs6000-protos.h (vec_const_128bit_type): Add mode field to detect initializing 16-bit floating constants. * config/rs6000/rs6000.cc (rs6000_hard_regno_mode_ok_uncached): Add support for 16-bit floating point. (rs6000_modes_tieable_p): Don't allow 16-bit floating point modes to tie with other modes. (rs6000_debug_fp_mode): New debug function for floating point. (rs6000_debug_reg_global): Print information for 16-bit floating point. Print more information for floating point modes. (rs6000_setup_reg_addr_masks): Add support for 16-bit floating point types. (rs6000_setup_reg_addr_masks): Likewise. (rs6000_init_hard_regno_mode_ok): Likewise. (rs6000_option_override_internal): Add suport for 16-bit floating point. (easy_altivec_constant): Likewise. (xxspltib_constant_p): Likewise. (rs6000_expand_vector_init): Likewise. (rs6000_expand_vector_set): Likewise. (rs6000_expand_vector_extract): Likewise. (rs6000_split_vec_extract_var): Likewise. (reg_offset_addressing_ok_p): Likewise. (rs6000_legitimate_offset_address_p): Likewise. (legitimate_lo_sum_address_p): Likewise. (rs6000_secondary_reload_simple_move): Likewise. (rs6000_preferred_reload_class): Likewise. (rs6000_can_change_mode_class): Likewise. (rs6000_output_move_128bit): Likewise. (rs6000_load_constant_and_splat): Likewise. (rs6000_libcall_value): Likewise. (rs6000_scalar_mode_supported_p): Likewise. (rs6000_libcall_value): Likewise. (rs6000_libgcc_floating_mode_supported_p): Likewise. (rs6000_floatn_mode): Likewise. (rs6000_opt_masks): Likewise. (constant_fp_to_128bit_vector): Likewise. (vec_const_128bit_to_bytes): Likewise. (constant_generates_xxspltiw): Likewise. * config/rs6000/rs6000.h (FP16_SCALAR_MODE_P): New macro. (FP16_VECTOR_MODE_P): Likewise. (TARGET_BFLOAT16_HW): New macro. (TARGET_FLOAT16_HW): Likewise. (TARGET_BFLOAT16_HW): Likewise. (TARGET_FLOAT16_HW): Likewise. (TARGET_FLOAT16_MIN_HARDWARE): Likewise. * config/rs6000/rs6000.md (wd): Add BFmode and HFmode. (toplevel): Include float16.md. * config/rs6000/rs6000.opt (-mloat16): New option. * doc/invoke.texi (RS/6000 and PowerPC Options): Document -mfloat16. * doc/md.texi (PowerPC and IBM RS6000 constraints): Document eZ. Diff: --- gcc/config.gcc | 10 ++ gcc/config/rs6000/constraints.md | 5 + gcc/config/rs6000/float16.md | 159 ++++++++++++++++++ gcc/config/rs6000/predicates.md | 78 +++++++++ gcc/config/rs6000/rs6000-builtin.cc | 21 +++ gcc/config/rs6000/rs6000-c.cc | 6 + gcc/config/rs6000/rs6000-call.cc | 8 +- gcc/config/rs6000/rs6000-cpus.def | 1 + gcc/config/rs6000/rs6000-protos.h | 1 + gcc/config/rs6000/rs6000.cc | 322 +++++++++++++++++++++++++++++++++--- gcc/config/rs6000/rs6000.h | 20 +++ gcc/config/rs6000/rs6000.md | 3 + gcc/config/rs6000/rs6000.opt | 4 + gcc/doc/invoke.texi | 25 ++- gcc/doc/md.texi | 3 + 15 files changed, 639 insertions(+), 27 deletions(-) diff --git a/gcc/config.gcc b/gcc/config.gcc index d5fdbd0b8646..e3b6a996b15f 100644 --- a/gcc/config.gcc +++ b/gcc/config.gcc @@ -5880,6 +5880,16 @@ case "${target}" in elif test x$with_long_double_format = xibm; then tm_defines="${tm_defines} TARGET_IEEEQUAD_DEFAULT=0" fi + + # Test if we should enable 16-bit floating point on the + # PowerPC platforms where we can support __bf16 and + # _Float16. + if test x$with_powerpc_float16 = xyes; then + tm_defines="${tm_defines} POWERPC_FLOAT16_DEFAULT=1" + + elif test x$with_powerpc_16bit_floating_point = xyes; then + tm_defines="${tm_defines} POWERPC_FLOAT16_DEFAULT=1" + fi ;; s390x-*-*) diff --git a/gcc/config/rs6000/constraints.md b/gcc/config/rs6000/constraints.md index 7a21815675a3..292ca67efb57 100644 --- a/gcc/config/rs6000/constraints.md +++ b/gcc/config/rs6000/constraints.md @@ -233,6 +233,11 @@ (and (match_code "const_int") (match_operand 0 "paddis_paddi_operand"))) +;; A negative 0 constant +(define_constraint "eZ" + "A floating point -0.0 constant." + (match_operand 0 "minus_zero_constant")) + ;; Floating-point constraints. These two are defined so that insn ;; length attributes can be calculated exactly. diff --git a/gcc/config/rs6000/float16.md b/gcc/config/rs6000/float16.md new file mode 100644 index 000000000000..29d970cda74f --- /dev/null +++ b/gcc/config/rs6000/float16.md @@ -0,0 +1,159 @@ +;; Machine description for IBM RISC System 6000 (POWER) for GNU C compiler +;; Copyright (C) 1990-2025 Free Software Foundation, Inc. +;; Contributed by Richard Kenner ([email protected]) + +;; This file is part of GCC. + +;; GCC is free software; you can redistribute it and/or modify it +;; under the terms of the GNU General Public License as published +;; by the Free Software Foundation; either version 3, or (at your +;; option) any later version. + +;; GCC is distributed in the hope that it will be useful, but WITHOUT +;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY +;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public +;; License for more details. + +;; You should have received a copy of the GNU General Public License +;; along with GCC; see the file COPYING3. If not see +;; <http://www.gnu.org/licenses/>. + +;; Support for _Float16 (HFmode) and __bf16 (BFmode) + +;; Mode iterator for 16-bit floating point modes both as a scalar and +;; as a vector. +(define_mode_iterator FP16 [BF HF]) +(define_mode_iterator VS_FP16 [BF HF V8BF V8HF]) +(define_mode_iterator VFP16 [V8BF V8HF]) + +;; Mode attribute giving the vector mode for a 16-bit floating point +;; scalar in both upper and lower case. +(define_mode_attr FP16_VECTOR8 [(BF "V8BF") + (HF "V8HF")]) + +(define_mode_attr fp16_vector8 [(BF "v8bf") + (HF "v8hf")]) + +;; _Float16 and __bf16 moves +(define_expand "mov<mode>" + [(set (match_operand:FP16 0 "nonimmediate_operand") + (match_operand:FP16 1 "any_operand"))] + "TARGET_FLOAT16" +{ + if (MEM_P (operands[0]) && !REG_P (operands[1])) + operands[1] = force_reg (<MODE>mode, operands[1]); +}) + +;; On power10, we can load up HFmode and BFmode constants with xxspltiw +;; or pli. +(define_insn "*mov<mode>_xxspltiw" + [(set (match_operand:FP16 0 "gpc_reg_operand" "=wa,wa,?r,?r") + (match_operand:FP16 1 "fp16_xxspltiw_constant" "j,eP,j, eP"))] + "TARGET_FLOAT16 + && (TARGET_PREFIXED || operands[1] == CONST0_RTX (<MODE>mode))" +{ + rtx op1 = operands[1]; + const REAL_VALUE_TYPE *rtype = CONST_DOUBLE_REAL_VALUE (op1); + long real_words[1]; + + if (op1 == CONST0_RTX (<MODE>mode)) + return (!vsx_register_operand (operands[0], <MODE>mode) + ? "li %0,0" + : "xxlxor %x0,%x0,%x0"); + + real_to_target (real_words, rtype, <MODE>mode); + operands[2] = GEN_INT (real_words[0]); + return (vsx_register_operand (operands[0], <MODE>mode) + ? "xxspltiw %x0,%2" + : "li %0,%2"); +} + [(set_attr "type" "veclogical, vecsimple, *, *") + (set_attr "prefixed" "no, yes, no, yes")]) + +;; Handle creating -0.0 if we don't have XXSPLTIW. For the scalar +;; modes, we can't do the gen_lowpart call until after register +;; allocation. +(define_split + [(set (match_operand:VS_FP16 0 "altivec_register_operand") + (match_operand:VS_FP16 1 "minus_zero_constant"))] + "TARGET_FLOAT16 && reload_completed" + [(const_int 0)] +{ + int dest_r = reg_or_subregno (operands[0]); + rtx dest = gen_rtx_REG (V8HImode, dest_r); + size_t nunits = GET_MODE_NUNITS (V8HFmode); + + rtvec v = rtvec_alloc (nunits); + for (size_t i = 0; i < nunits; i++) + RTVEC_ELT (v, i) = constm1_rtx; + + rs6000_expand_vector_init (dest, gen_rtx_PARALLEL (V8HImode, v)); + emit_insn (gen_rtx_SET (dest, gen_rtx_ASHIFT (V8HImode, dest, dest))); + DONE; +}) + + +(define_insn "*mov<mode>_internal" + [(set (match_operand:FP16 0 "nonimmediate_operand" + "=wa, wa, Z, r, r, + m, r, wa, wa, r, + v") + + (match_operand:FP16 1 "any_operand" + "wa, Z, wa, r, m, + r, wa, r, j, j, + eZ"))] + "TARGET_FLOAT16 + && (gpc_reg_operand (operands[0], <MODE>mode) + || gpc_reg_operand (operands[1], <MODE>mode))" + "@ + xxlor %x0,%x1,%x1 + lxsihzx %x0,%y1 + stxsihx %x1,%y0 + mr %0,%1 + lhz%U1%X1 %0,%1 + sth%U0%X0 %1,%0 + mfvsrwz %0,%x1 + mtvsrwz %x0,%1 + xxlxor %x0,%x0,%x0 + li %0,0 + #" + [(set_attr "type" "vecsimple, fpload, fpstore, *, load, + store, mtvsr, mfvsr, veclogical, *, + vecperm") + (set_attr "isa" "*, p9v, p9v, *, *, + *, p8v, p8v, p9v, *, + *") + (set_attr "length" "*, *, *, *, *, + *, *, *, *, *, + 8")]) + +;; Vector duplicate +(define_insn "*vecdup<mode>_reg" + [(set (match_operand:<FP16_VECTOR8> 0 "altivec_register_operand" "=v") + (vec_duplicate:<FP16_VECTOR8> + (match_operand:FP16 1 "altivec_register_operand" "v")))] + "TARGET_FLOAT16" + "vsplth %0,%1,3" + [(set_attr "type" "vecperm")]) + +(define_insn "*vecdup<mode>_const" + [(set (match_operand:<FP16_VECTOR8> 0 "vsx_register_operand" "=wa,wa") + (vec_duplicate:<FP16_VECTOR8> + (match_operand:FP16 1 "fp16_xxspltiw_constant" "j,eP")))] + "TARGET_FLOAT16 + && (TARGET_PREFIXED || operands[1] == CONST0_RTX (<MODE>mode))" +{ + rtx op1 = operands[1]; + if (op1 == CONST0_RTX (<MODE>mode)) + return "xxlxor %x0,%x0,%x0"; + + const REAL_VALUE_TYPE *rtype = CONST_DOUBLE_REAL_VALUE (op1); + long real_words[1]; + + real_to_target (real_words, rtype, <MODE>mode); + operands[2] = GEN_INT (real_words[0]); + return "xxspltiw %x0,2"; +} + [(set_attr "type" "veclogical,vecperm") + (set_attr "prefixed" "*,yes")]) diff --git a/gcc/config/rs6000/predicates.md b/gcc/config/rs6000/predicates.md index 7e028b16a787..eb98d7109b2f 100644 --- a/gcc/config/rs6000/predicates.md +++ b/gcc/config/rs6000/predicates.md @@ -721,6 +721,11 @@ if (TARGET_VSX && op == CONST0_RTX (mode)) return 1; + /* If we are on power10, we can use XXSPLTIW to load constants. On power8 + and power9, we can use direct move. */ + if (FP16_SCALAR_MODE_P (mode)) + return true; + /* Constants that can be generated with ISA 3.1 instructions are easy. */ vec_const_128bit_type vsx_const; if (TARGET_POWER10 && vec_const_128bit_to_bytes (op, mode, &vsx_const)) @@ -864,6 +869,10 @@ return true; } + /* -0,0 can be done as VSPLTIH x,-1 and VSLH x,x,x. */ + if (FP16_VECTOR_MODE_P (mode) && minus_zero_constant (op, mode)) + return true; + if (TARGET_P9_VECTOR && xxspltib_constant_p (op, mode, &num_insns, &value)) return true; @@ -2292,3 +2301,72 @@ (define_predicate "lxvl_else_operand" (and (match_code "const_vector") (match_test "op == CONST0_RTX (GET_MODE (op))"))) + +;; Return 1 if this is a floating point scalar constant that is -0.0 or +;; a vector floating point constant where each element is -0.0. +(define_predicate "minus_zero_constant" + (match_code "const_double,vec_duplicate,const_vector") +{ + if (GET_CODE (op) == VEC_DUPLICATE) + { + op = XEXP (op, 0); + if (!CONST_DOUBLE_P (op)) + return false; + + mode = GET_MODE (op); + } + + /* Scalar or vector filled with duplicates. */ + if (CONST_DOUBLE_P (op)) + { + if (!SCALAR_FLOAT_MODE_P (mode)) + return false; + + const REAL_VALUE_TYPE *rtype = CONST_DOUBLE_REAL_VALUE (op); + return real_isnegzero (rtype); + } + + /* Vector constant, check all elements. */ + else if (CONST_VECTOR_P (op)) + { + if (GET_MODE_CLASS (mode) != MODE_VECTOR_FLOAT) + return false; + + size_t nunits = GET_MODE_NUNITS (mode); + for (size_t i = 0; i < nunits; i++) + { + rtx ele = CONST_VECTOR_ELT (op, i); + if (!CONST_DOUBLE_P (ele)) + return false; + + const REAL_VALUE_TYPE *rtype = CONST_DOUBLE_REAL_VALUE (ele); + if (!real_isnegzero (rtype)) + return false; + } + + return true; + } + + return false; +}) + +;; Return 1 if this is a 16-bit floating point constant that can be +;; loaded with XXSPLTIW or is 0.0 that can be loaded with XXSPLTIB. +(define_predicate "fp16_xxspltiw_constant" + (match_code "const_double") +{ + if (!FP16_SCALAR_MODE_P (mode)) + return false; + + if (op == CONST0_RTX (mode)) + return true; + + if (!TARGET_PREFIXED) + return false; + + vec_const_128bit_type vsx_const; + if (!vec_const_128bit_to_bytes (op, mode, &vsx_const)) + return false; + + return constant_generates_xxspltiw (&vsx_const); +}) diff --git a/gcc/config/rs6000/rs6000-builtin.cc b/gcc/config/rs6000/rs6000-builtin.cc index 33c82b949528..3faee40ab2aa 100644 --- a/gcc/config/rs6000/rs6000-builtin.cc +++ b/gcc/config/rs6000/rs6000-builtin.cc @@ -513,6 +513,10 @@ const char *rs6000_type_string (tree type_node) return "voidc*"; else if (type_node == float128_type_node) return "_Float128"; + else if (type_node == float16_type_node) + return "_Float16"; + else if (TARGET_FLOAT16 && type_node == bfloat16_type_node) + return "__bf16"; else if (type_node == vector_pair_type_node) return "__vector_pair"; else if (type_node == vector_quad_type_node) @@ -795,6 +799,23 @@ rs6000_init_builtins (void) lang_hooks.types.register_builtin_type (uintPTI_type_internal_node, "__upti_internal"); } + + /* __bf16 support. */ + if (TARGET_FLOAT16) + { + if (!bfloat16_type_node) + { + bfloat16_type_node = make_node (REAL_TYPE); + TYPE_PRECISION (bfloat16_type_node) = 16; + SET_TYPE_MODE (bfloat16_type_node, BFmode); + layout_type (bfloat16_type_node); + t = build_qualified_type (bfloat16_type_node, TYPE_QUAL_CONST); + } + + lang_hooks.types.register_builtin_type (bfloat16_type_node, + "__bf16"); + } + /* Vector pair and vector quad support. */ vector_pair_type_node = make_node (OPAQUE_TYPE); SET_TYPE_MODE (vector_pair_type_node, OOmode); diff --git a/gcc/config/rs6000/rs6000-c.cc b/gcc/config/rs6000/rs6000-c.cc index 1e5988e1f06f..8630d12e4bd4 100644 --- a/gcc/config/rs6000/rs6000-c.cc +++ b/gcc/config/rs6000/rs6000-c.cc @@ -583,6 +583,12 @@ rs6000_target_modify_macros (bool define_p, HOST_WIDE_INT flags) if ((flags & OPTION_MASK_FLOAT128_HW) != 0) rs6000_define_or_undefine_macro (define_p, "__FLOAT128_HARDWARE__"); + /* 16-bit floating point support. */ + if ((flags & OPTION_MASK_FLOAT16) != 0) + { + rs6000_define_or_undefine_macro (define_p, "__FLOAT16__"); + rs6000_define_or_undefine_macro (define_p, "__BFLOAT16__"); + } /* Tell the user if we are targeting CELL. */ if (rs6000_cpu == PROCESSOR_CELL) rs6000_define_or_undefine_macro (define_p, "__PPU__"); diff --git a/gcc/config/rs6000/rs6000-call.cc b/gcc/config/rs6000/rs6000-call.cc index 742751465fa8..ca2f7170a412 100644 --- a/gcc/config/rs6000/rs6000-call.cc +++ b/gcc/config/rs6000/rs6000-call.cc @@ -590,7 +590,7 @@ call_ABI_of_interest (tree fndecl) void init_cumulative_args (CUMULATIVE_ARGS *cum, tree fntype, - rtx libname ATTRIBUTE_UNUSED, int incoming, + rtx libname, int incoming, int libcall, int n_named_args, tree fndecl, machine_mode return_mode ATTRIBUTE_UNUSED) @@ -653,6 +653,12 @@ init_cumulative_args (CUMULATIVE_ARGS *cum, tree fntype, if (cum->call_cookie & CALL_LONG) fprintf (stderr, " longcall,"); + if (libname) + fprintf (stderr, " name=%s,", XSTR (libname, 0)); + + if (libcall) + fprintf (stderr, " libcall,"); + fprintf (stderr, " proto = %d, nargs = %d\n", cum->prototype, cum->nargs_prototype); } diff --git a/gcc/config/rs6000/rs6000-cpus.def b/gcc/config/rs6000/rs6000-cpus.def index 4dcdcf7c858d..cac42403fd94 100644 --- a/gcc/config/rs6000/rs6000-cpus.def +++ b/gcc/config/rs6000/rs6000-cpus.def @@ -131,6 +131,7 @@ | OPTION_MASK_EFFICIENT_UNALIGNED_VSX \ | OPTION_MASK_FLOAT128_HW \ | OPTION_MASK_FLOAT128_KEYWORD \ + | OPTION_MASK_FLOAT16 \ | OPTION_MASK_FPRND \ | OPTION_MASK_POWER10 \ | OPTION_MASK_POWER11 \ diff --git a/gcc/config/rs6000/rs6000-protos.h b/gcc/config/rs6000/rs6000-protos.h index cc5818d668da..5d5074ca51b7 100644 --- a/gcc/config/rs6000/rs6000-protos.h +++ b/gcc/config/rs6000/rs6000-protos.h @@ -250,6 +250,7 @@ typedef struct { bool all_words_same; /* Are the words all equal? */ bool all_half_words_same; /* Are the half words all equal? */ bool all_bytes_same; /* Are the bytes all equal? */ + machine_mode mode; /* Original constant mode. */ } vec_const_128bit_type; extern bool vec_const_128bit_to_bytes (rtx, machine_mode, diff --git a/gcc/config/rs6000/rs6000.cc b/gcc/config/rs6000/rs6000.cc index 89af57b8894d..893654f57fed 100644 --- a/gcc/config/rs6000/rs6000.cc +++ b/gcc/config/rs6000/rs6000.cc @@ -1924,7 +1924,8 @@ rs6000_hard_regno_mode_ok_uncached (int regno, machine_mode mode) if (ALTIVEC_REGNO_P (regno)) { - if (GET_MODE_SIZE (mode) < 16 && !reg_addr[mode].scalar_in_vmx_p) + if (GET_MODE_SIZE (mode) < 16 && !reg_addr[mode].scalar_in_vmx_p + && !FP16_SCALAR_MODE_P (mode)) return 0; return ALTIVEC_REGNO_P (last_regno); @@ -2015,7 +2016,8 @@ rs6000_modes_tieable_p (machine_mode mode1, machine_mode mode2) { if (mode1 == PTImode || mode1 == OOmode || mode1 == XOmode || mode1 == TDOmode || mode2 == PTImode || mode2 == OOmode - || mode2 == XOmode || mode2 == TDOmode) + || mode2 == XOmode || mode2 == TDOmode + || FP16_SCALAR_MODE_P (mode1) || FP16_SCALAR_MODE_P (mode2)) return mode1 == mode2; if (ALTIVEC_OR_VSX_VECTOR_MODE (mode1)) @@ -2254,6 +2256,20 @@ rs6000_debug_print_mode (ssize_t m) #define DEBUG_FMT_WX DEBUG_FMT_ID "%#.12" HOST_WIDE_INT_PRINT "x: " #define DEBUG_FMT_S DEBUG_FMT_ID "%s\n" +/* Print interesting floating point information. */ +static void +rs6000_debug_fp_mode (machine_mode m) +{ + fprintf (stderr, + DEBUG_FMT_ID "nan: %c, snan: %c, inf: %c, -0: %c, size: %2d\n", + GET_MODE_NAME (m), + HONOR_NANS (m) ? 'y' : 'n', + HONOR_SNANS (m) ? 'y' : 'n', + HONOR_INFINITIES (m) ? 'y' : 'n', + HONOR_SIGNED_ZEROS (m) ? 'y' : 'n', + (int) GET_MODE_SIZE (m)); +} + /* Print various interesting information with -mdebug=reg. */ static void rs6000_debug_reg_global (void) @@ -2280,6 +2296,8 @@ rs6000_debug_reg_global (void) DImode, TImode, PTImode, + BFmode, + HFmode, SFmode, DFmode, TFmode, @@ -2632,6 +2650,63 @@ rs6000_debug_reg_global (void) if (TARGET_DIRECT_MOVE_128) fprintf (stderr, DEBUG_FMT_D, "VSX easy 64-bit mfvsrld element", (int)VECTOR_ELEMENT_MFVSRLD_64BIT); + + if (TARGET_FLOAT16) + { + fprintf (stderr, DEBUG_FMT_S, "_Float16", + (TARGET_FLOAT16_HW ? "hardware" : "software")); + fprintf (stderr, DEBUG_FMT_S, "__bf16", + (TARGET_BFLOAT16_HW ? "hardware" : "software")); + +#if POWERPC_FLOAT16_DEFAULT + fprintf (stderr, DEBUG_FMT_S, "float16 configured", "enabled"); +#endif + } + else + { + fprintf (stderr, DEBUG_FMT_S, "_Float16", "disabled"); + fprintf (stderr, DEBUG_FMT_S, "__bf16", "disabled"); + } + + if (TARGET_HARD_FLOAT) + { + rs6000_debug_fp_mode (SFmode); + rs6000_debug_fp_mode (DFmode); + + if (rs6000_long_double_type_size == 128) + rs6000_debug_fp_mode (TFmode); + + if (TARGET_FLOAT128_TYPE) + { + rs6000_debug_fp_mode (KFmode); + rs6000_debug_fp_mode (IFmode); + } + + if (TARGET_DFP) + { + rs6000_debug_fp_mode (SDmode); + rs6000_debug_fp_mode (DDmode); + rs6000_debug_fp_mode (TDmode); + } + + if (TARGET_FLOAT16) + { + rs6000_debug_fp_mode (BFmode); + rs6000_debug_fp_mode (HFmode); + } + + if (TARGET_VSX) + { + rs6000_debug_fp_mode (V4SFmode); + rs6000_debug_fp_mode (V2DFmode); + + if (TARGET_FLOAT16) + { + rs6000_debug_fp_mode (V8BFmode); + rs6000_debug_fp_mode (V8HFmode); + } + } + } } @@ -2662,8 +2737,14 @@ rs6000_setup_reg_addr_masks (void) /* SDmode is special in that we want to access it only via REG+REG addressing on power7 and above, since we want to use the LFIWZX and - STFIWZX instructions to load it. */ - bool indexed_only_p = (m == SDmode && TARGET_NO_SDMODE_STACK); + STFIWZX instructions to load it. + + Never allow offset addressing for 16-bit floating point modes, since + it is expected that 16-bit floating point should always go into the + vector registers and we only have indexed and indirect 16-bit loads to + VSR registers. */ + bool indexed_only_p = ((m == SDmode && TARGET_NO_SDMODE_STACK) + || FP16_SCALAR_MODE_P (m)); any_addr_mask = 0; for (rc = FIRST_RELOAD_REG_CLASS; rc <= LAST_RELOAD_REG_CLASS; rc++) @@ -2726,6 +2807,7 @@ rs6000_setup_reg_addr_masks (void) && !complex_p && (m != E_DFmode || !TARGET_VSX) && (m != E_SFmode || !TARGET_P8_VECTOR) + && !FP16_SCALAR_MODE_P (m) && !small_int_vsx_p) { addr_mask |= RELOAD_REG_PRE_INCDEC; @@ -2985,6 +3067,15 @@ rs6000_init_hard_regno_mode_ok (bool global_init_p) rs6000_vector_align[V1TImode] = 128; } + /* _Float16 support. */ + if (TARGET_FLOAT16) + { + rs6000_vector_mem[HFmode] = VECTOR_VSX; + rs6000_vector_mem[BFmode] = VECTOR_VSX; + rs6000_vector_align[HFmode] = 16; + rs6000_vector_align[BFmode] = 16; + } + /* DFmode, see if we want to use the VSX unit. Memory is handled differently, so don't set rs6000_vector_mem. */ if (TARGET_VSX) @@ -3104,6 +3195,14 @@ rs6000_init_hard_regno_mode_ok (bool global_init_p) reg_addr[TFmode].reload_load = CODE_FOR_reload_tf_di_load; } + if (TARGET_FLOAT16) + { + reg_addr[HFmode].reload_store = CODE_FOR_reload_hf_di_store; + reg_addr[BFmode].reload_store = CODE_FOR_reload_bf_di_store; + reg_addr[HFmode].reload_load = CODE_FOR_reload_hf_di_load; + reg_addr[BFmode].reload_load = CODE_FOR_reload_bf_di_load; + } + /* Only provide a reload handler for SDmode if lfiwzx/stfiwx are available. */ if (TARGET_NO_SDMODE_STACK) @@ -3204,6 +3303,14 @@ rs6000_init_hard_regno_mode_ok (bool global_init_p) reg_addr[TFmode].reload_load = CODE_FOR_reload_tf_si_load; } + if (TARGET_FLOAT16) + { + reg_addr[HFmode].reload_store = CODE_FOR_reload_hf_si_store; + reg_addr[BFmode].reload_store = CODE_FOR_reload_bf_si_store; + reg_addr[HFmode].reload_load = CODE_FOR_reload_hf_si_load; + reg_addr[BFmode].reload_load = CODE_FOR_reload_bf_si_load; + } + /* Only provide a reload handler for SDmode if lfiwzx/stfiwx are available. */ if (TARGET_NO_SDMODE_STACK) @@ -3952,6 +4059,32 @@ rs6000_option_override_internal (bool global_init_p) } } + /* Enable -mfloat16 if it was configured, the user did not specify -mfloat16 + or -mno-float16, and we have the minimum hardware requirements to handle + 16-bit floating point. */ + if ((rs6000_isa_flags_explicit & OPTION_MASK_FLOAT16) == 0) + { +#if POWERPC_FLOAT16_DEFAULT + if (TARGET_FLOAT16_MIN_HARDWARE) + rs6000_isa_flags |= OPTION_MASK_FLOAT16; + else +#endif + rs6000_isa_flags &= ~OPTION_MASK_FLOAT16; + } + + /* 16-bit floating point needs 64-bit power8 at a minimum in order to load up + 16-bit values into vector registers via loads/stores from GPRs and then + using direct moves. Don't allow 16-bit float on big endian systems at the + current time. */ + if (TARGET_FLOAT16 && !TARGET_FLOAT16_MIN_HARDWARE) + { + rs6000_isa_flags &= ~OPTION_MASK_FLOAT16; + if (rs6000_isa_flags_explicit & OPTION_MASK_FLOAT16) + error ("%qs is only available on 64-bit little endian systems " + "that use at least %qs", + "-mfloat16", "-mcpu=power8"); + } + /* If hard-float/altivec/vsx were explicitly turned off then don't allow the -mcpu setting to enable options that conflict. */ if ((!TARGET_HARD_FLOAT || !TARGET_ALTIVEC || !TARGET_VSX) @@ -6560,6 +6693,12 @@ easy_altivec_constant (rtx op, machine_mode mode) return 0; } + /* For 16-bit floating point vectors, only allow 0.0 and -0.0 as easy altivec + constants. */ + if (FP16_VECTOR_MODE_P (mode)) + return (zero_constant (op, mode) || minus_zero_constant (op, mode) + ? 8 : 0); + /* V1TImode is a special container for TImode. Ignore for now. */ else if (mode == V1TImode) return 0; @@ -6667,6 +6806,12 @@ xxspltib_constant_p (rtx op, /* Handle (vec_duplicate <constant>). */ if (GET_CODE (op) == VEC_DUPLICATE) { + element = XEXP (op, 0); + + /* For 16-bit floating point, the only valid use is xxspltib is 0.0. */ + if (FP16_VECTOR_MODE_P (mode)) + return element == CONST0_RTX (GET_MODE_INNER (mode)); + if (mode != V16QImode && mode != V8HImode && mode != V4SImode && mode != V2DImode) return false; @@ -6683,6 +6828,20 @@ xxspltib_constant_p (rtx op, /* Handle (const_vector [...]). */ else if (GET_CODE (op) == CONST_VECTOR) { + /* For V8BFmode & V8HFmode, the only valid use is xxspltib is 0.0. */ + if (FP16_VECTOR_MODE_P (mode)) + { + if (op == CONST0_RTX (mode)) + return true; + + rtx zero = CONST0_RTX (GET_MODE_INNER (mode)); + for (i = 0; i < nunits; i++) + if (CONST_VECTOR_ELT (op, i) != zero) + return false; + + return true; + } + if (mode != V16QImode && mode != V8HImode && mode != V4SImode && mode != V2DImode) return false; @@ -7129,6 +7288,15 @@ rs6000_expand_vector_init (rtx target, rtx vals) return; } + /* Special case splats of 16-bit floating point. */ + if (all_same && FP16_VECTOR_MODE_P (mode)) + { + rtx op0 = force_reg (GET_MODE_INNER (mode), XVECEXP (vals, 0, 0)); + rtx dup = gen_rtx_VEC_DUPLICATE (mode, op0); + emit_insn (gen_rtx_SET (target, dup)); + return; + } + /* Special case initializing vector short/char that are splats if we are on 64-bit systems with direct move. */ if (all_same && TARGET_DIRECT_MOVE_64BIT @@ -7623,6 +7791,10 @@ rs6000_expand_vector_set (rtx target, rtx val, rtx elt_rtx) insn = gen_vsx_set_v4si_p9 (target, target, val, elt_rtx); else if (mode == V8HImode) insn = gen_vsx_set_v8hi_p9 (target, target, val, elt_rtx); + else if (mode == V8HFmode) + insn = gen_vsx_set_v8hf_p9 (target, target, val, elt_rtx); + else if (mode == V8BFmode) + insn = gen_vsx_set_v8bf_p9 (target, target, val, elt_rtx); else if (mode == V16QImode) insn = gen_vsx_set_v16qi_p9 (target, target, val, elt_rtx); else if (mode == V4SFmode) @@ -7740,6 +7912,22 @@ rs6000_expand_vector_extract (rtx target, rtx vec, rtx elt) } else break; + case E_V8HFmode: + if (TARGET_DIRECT_MOVE_64BIT) + { + emit_insn (gen_vsx_extract_v8hf (target, vec, elt)); + return; + } + else + break; + case E_V8BFmode: + if (TARGET_DIRECT_MOVE_64BIT) + { + emit_insn (gen_vsx_extract_v8bf (target, vec, elt)); + return; + } + else + break; case E_V4SImode: if (TARGET_DIRECT_MOVE_64BIT) { @@ -7787,6 +7975,14 @@ rs6000_expand_vector_extract (rtx target, rtx vec, rtx elt) emit_insn (gen_vsx_extract_v8hi_var (target, vec, elt)); return; + case E_V8HFmode: + emit_insn (gen_vsx_extract_v8hf_var (target, vec, elt)); + return; + + case E_V8BFmode: + emit_insn (gen_vsx_extract_v8bf_var (target, vec, elt)); + return; + case E_V16QImode: emit_insn (gen_vsx_extract_v16qi_var (target, vec, elt)); return; @@ -8064,7 +8260,10 @@ rs6000_split_vec_extract_var (rtx dest, rtx src, rtx element, rtx tmp_gpr, /* See if we want to generate VEXTU{B,H,W}{L,R}X if the destination is in a general purpose register. */ if (TARGET_P9_VECTOR - && (mode == V16QImode || mode == V8HImode || mode == V4SImode) + && (mode == V16QImode + || mode == V8HImode + || mode == V4SImode + || FP16_VECTOR_MODE_P (mode)) && INT_REGNO_P (dest_regno) && ALTIVEC_REGNO_P (src_regno) && INT_REGNO_P (element_regno)) @@ -8077,7 +8276,7 @@ rs6000_split_vec_extract_var (rtx dest, rtx src, rtx element, rtx tmp_gpr, ? gen_vextublx (dest_si, element_si, src) : gen_vextubrx (dest_si, element_si, src)); - else if (mode == V8HImode) + else if (mode == V8HImode || FP16_VECTOR_MODE_P (mode)) { rtx tmp_gpr_si = gen_rtx_REG (SImode, REGNO (tmp_gpr)); emit_insn (gen_ashlsi3 (tmp_gpr_si, element_si, const1_rtx)); @@ -8179,6 +8378,8 @@ rs6000_split_vec_extract_var (rtx dest, rtx src, rtx element, rtx tmp_gpr, case E_V4SImode: case E_V8HImode: + case E_V8HFmode: + case E_V8BFmode: case E_V16QImode: { rtx tmp_altivec_di = gen_rtx_REG (DImode, REGNO (tmp_altivec)); @@ -8796,6 +8997,13 @@ reg_offset_addressing_ok_p (machine_mode mode) case E_TDOmode: return TARGET_DMF; + /* For 16-bit floating point types, do not allow offset addressing, since + it is assumed that most of the use will be in vector registers, and we + only have reg+reg addressing for 16-bit modes. */ + case E_BFmode: + case E_HFmode: + return false; + case E_SDmode: /* If we can do direct load/stores of SDmode, restrict it to reg+reg addressing for the LFIWZX and STFIWX instructions. */ @@ -9080,6 +9288,13 @@ rs6000_legitimate_offset_address_p (machine_mode mode, rtx x, extra = 0; switch (mode) { + /* For 16-bit floating point types, do not allow offset addressing, since + it is assumed that most of the use will be in vector registers, and we + only have reg+reg addressing for 16-bit modes. */ + case E_BFmode: + case E_HFmode: + return false; + case E_DFmode: case E_DDmode: case E_DImode: @@ -9181,6 +9396,11 @@ macho_lo_sum_memory_operand (rtx x, machine_mode mode) static bool legitimate_lo_sum_address_p (machine_mode mode, rtx x, int strict) { + /* For 16-bit floating point types, do not allow offset addressing, since + it is assumed that most of the use will be in vector registers, and we + only have reg+reg addressing for 16-bit modes. */ + if (FP16_SCALAR_MODE_P (mode)) + return false; if (GET_CODE (x) != LO_SUM) return false; if (!REG_P (XEXP (x, 0))) @@ -12798,6 +13018,9 @@ rs6000_secondary_reload_simple_move (enum rs6000_reg_type to_type, && ((to_type == GPR_REG_TYPE && from_type == VSX_REG_TYPE) || (to_type == VSX_REG_TYPE && from_type == GPR_REG_TYPE))) { + if (FP16_SCALAR_MODE_P (mode)) + return true; + if (TARGET_POWERPC64) { /* ISA 2.07: MTVSRD or MVFVSRD. */ @@ -13595,6 +13818,11 @@ rs6000_preferred_reload_class (rtx x, enum reg_class rclass) || mode_supports_dq_form (mode)) return rclass; + /* IEEE 16-bit and bf16 don't support offset addressing, but they can + go in any floating point/vector register. */ + if (FP16_SCALAR_MODE_P (mode)) + return rclass; + /* If this is a scalar floating point value and we don't have D-form addressing, prefer the traditional floating point registers so that we can use D-form (register+offset) addressing. */ @@ -13612,6 +13840,16 @@ rs6000_preferred_reload_class (rtx x, enum reg_class rclass) return rclass; } + /* For 16-bit floating point scalar modes, if we have lxsihzx/stxsihzx from + Power9, prefer the vector registers. On power8, we will need to use GPRs + to do load/store. For 16-bit floating point vector modes, only prefer + VSX. */ + if (FP16_VECTOR_MODE_P (mode)) + return TARGET_P9_VECTOR ? VSX_REGS : rclass; + + if (FP16_VECTOR_MODE_P (mode)) + return VSX_REGS; + if (is_constant || GET_CODE (x) == PLUS) { if (reg_class_subset_p (GENERAL_REGS, rclass)) @@ -13847,6 +14085,9 @@ rs6000_can_change_mode_class (machine_mode from, unsigned from_size = GET_MODE_SIZE (from); unsigned to_size = GET_MODE_SIZE (to); + if (FP16_SCALAR_MODE_P (from) || FP16_SCALAR_MODE_P (to)) + return from_size == to_size; + if (from_size != to_size) { enum reg_class xclass = (TARGET_VSX) ? VSX_REGS : FLOAT_REGS; @@ -14064,7 +14305,8 @@ rs6000_output_move_128bit (rtx operands[]) else if (TARGET_P9_VECTOR) return "lxvx %x0,%y1"; - else if (mode == V16QImode || mode == V8HImode || mode == V4SImode) + else if (mode == V16QImode || mode == V8HImode || mode == V4SImode + || FP16_VECTOR_MODE_P (mode)) return "lxvw4x %x0,%y1"; else @@ -14102,7 +14344,8 @@ rs6000_output_move_128bit (rtx operands[]) else if (TARGET_P9_VECTOR) return "stxvx %x1,%y0"; - else if (mode == V16QImode || mode == V8HImode || mode == V4SImode) + else if (mode == V16QImode || mode == V8HImode || mode == V4SImode + || FP16_VECTOR_MODE_P (mode)) return "stxvw4x %x1,%y0"; else @@ -23216,7 +23459,7 @@ rs6000_load_constant_and_splat (machine_mode mode, REAL_VALUE_TYPE dconst) { rtx reg; - if (mode == SFmode || mode == DFmode) + if (mode == SFmode || mode == DFmode || FP16_SCALAR_MODE_P (mode)) { rtx d = const_double_from_real_value (dconst, mode); reg = force_reg (mode, d); @@ -24559,6 +24802,8 @@ rs6000_scalar_mode_supported_p (scalar_mode mode) return default_decimal_float_supported_p (); else if (TARGET_FLOAT128_TYPE && (mode == KFmode || mode == IFmode)) return true; + else if (FP16_SCALAR_MODE_P (mode)) + return true; else return default_scalar_mode_supported_p (mode); } @@ -24583,6 +24828,10 @@ rs6000_libgcc_floating_mode_supported_p (scalar_float_mode mode) case E_KFmode: return TARGET_FLOAT128_TYPE && !TARGET_IEEEQUAD; + case E_BFmode: + case E_HFmode: + return TARGET_FLOAT16; + default: return false; } @@ -24610,6 +24859,9 @@ rs6000_floatn_mode (int n, bool extended) { switch (n) { + case 16: + return TARGET_FLOAT16 ? SFmode : opt_scalar_float_mode (); + case 32: return DFmode; @@ -24631,6 +24883,9 @@ rs6000_floatn_mode (int n, bool extended) { switch (n) { + case 16: + return TARGET_FLOAT16 ? HFmode : opt_scalar_float_mode (); + case 32: return SFmode; @@ -24794,6 +25049,7 @@ static struct rs6000_opt_mask const rs6000_opt_masks[] = { "dense-math", OPTION_MASK_DMF, false, true }, { "hard-dfp", OPTION_MASK_DFP, false, true }, { "htm", OPTION_MASK_HTM, false, true }, + { "float16", OPTION_MASK_FLOAT16, false, true }, { "isel", OPTION_MASK_ISEL, false, true }, { "mfcrf", OPTION_MASK_MFCRF, false, true }, { "mfpgpr", 0, false, true }, @@ -29227,24 +29483,37 @@ constant_fp_to_128bit_vector (rtx op, const REAL_VALUE_TYPE *rtype = CONST_DOUBLE_REAL_VALUE (op); long real_words[VECTOR_128BIT_WORDS]; - /* Make sure we don't overflow the real_words array and that it is - filled completely. */ - gcc_assert (num_words <= VECTOR_128BIT_WORDS && (bitsize % 32) == 0); - - real_to_target (real_words, rtype, mode); + /* For 16-bit floating point, the constant doesn't fill the whole 32-bit + word. Deal with it here, storing the bytes in big endian fashion. */ + if (FP16_SCALAR_MODE_P (mode)) + { + real_to_target (real_words, rtype, mode); + info->bytes[byte_num] = (unsigned char) (real_words[0] >> 8); + info->bytes[byte_num+1] = (unsigned char) (real_words[0]); + } - /* Iterate over each 32-bit word in the floating point constant. The - real_to_target function puts out words in target endian fashion. We need - to arrange the order so that the bytes are written in big endian order. */ - for (unsigned num = 0; num < num_words; num++) + else { - unsigned endian_num = (BYTES_BIG_ENDIAN - ? num - : num_words - 1 - num); + /* Make sure we don't overflow the real_words array and that it is filled + completely. */ + gcc_assert (num_words <= VECTOR_128BIT_WORDS && (bitsize % 32) == 0); + + real_to_target (real_words, rtype, mode); + + /* Iterate over each 32-bit word in the floating point constant. The + real_to_target function puts out words in target endian fashion. We + need to arrange the order so that the bytes are written in big endian + order. */ + for (unsigned num = 0; num < num_words; num++) + { + unsigned endian_num = (BYTES_BIG_ENDIAN + ? num + : num_words - 1 - num); - unsigned uvalue = real_words[endian_num]; - for (int shift = 32 - 8; shift >= 0; shift -= 8) - info->bytes[byte_num++] = (uvalue >> shift) & 0xff; + unsigned uvalue = real_words[endian_num]; + for (int shift = 32 - 8; shift >= 0; shift -= 8) + info->bytes[byte_num++] = (uvalue >> shift) & 0xff; + } } /* Mark that this constant involves floating point. */ @@ -29283,6 +29552,7 @@ vec_const_128bit_to_bytes (rtx op, return false; /* Set up the bits. */ + info->mode = mode; switch (GET_CODE (op)) { /* Integer constants, default to double word. */ @@ -29510,6 +29780,10 @@ constant_generates_xxspltiw (vec_const_128bit_type *vsx_const) if (!TARGET_SPLAT_WORD_CONSTANT || !TARGET_PREFIXED || !TARGET_VSX) return 0; + /* HFmode/BFmode constants can always use XXSPLTIW. */ + if (FP16_SCALAR_MODE_P (vsx_const->mode)) + return 1; + if (!vsx_const->all_words_same) return 0; diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h index e3b45b88a206..c888c4c4a4f6 100644 --- a/gcc/config/rs6000/rs6000.h +++ b/gcc/config/rs6000/rs6000.h @@ -318,6 +318,26 @@ extern const char *host_detect_local_cpu (int argc, const char **argv); #define TARGET_DEBUG_TARGET (rs6000_debug & MASK_DEBUG_TARGET) #define TARGET_DEBUG_BUILTIN (rs6000_debug & MASK_DEBUG_BUILTIN) +/* Is this a valid 16-bit scalar floating point mode? */ +#define FP16_SCALAR_MODE_P(MODE) \ + (TARGET_FLOAT16 && ((MODE) == HFmode || (MODE) == BFmode)) + +/* Is this a valid 16-bit scalar floating point mode? */ +#define FP16_VECTOR_MODE_P(MODE) \ + (TARGET_FLOAT16 && ((MODE) == V8HFmode || (MODE) == V8BFmode)) + +/* Do we have conversion support in hardware for the 16-bit floating point? */ +#define TARGET_BFLOAT16_HW (TARGET_FLOAT16 && TARGET_POWER10) +#define TARGET_FLOAT16_HW (TARGET_FLOAT16 && TARGET_P9_VECTOR) + +/* Macro to say that we have the minimum hardware to enable 16-bit floating + point. We require a little endian 64-bit machine that supports at least + power8 with VSX support. */ +#define TARGET_FLOAT16_MIN_HARDWARE (TARGET_P8_VECTOR \ + && TARGET_POWERPC64 \ + && !BYTES_BIG_ENDIAN \ + && TARGET_HARD_FLOAT) + /* Helper macros for TFmode. Quad floating point (TFmode) can be either IBM long double format that uses a pair of doubles, or IEEE 128-bit floating point. KFmode was added as a way to represent IEEE 128-bit floating point, diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md index 9dc64fa51512..3bff9e4aa31b 100644 --- a/gcc/config/rs6000/rs6000.md +++ b/gcc/config/rs6000/rs6000.md @@ -733,6 +733,8 @@ ; A generic w/d attribute, for things like cmpw/cmpd. (define_mode_attr wd [(QI "b") (HI "h") + (BF "h") + (HF "h") (SI "w") (DI "d") (V16QI "b") @@ -16254,3 +16256,4 @@ (include "htm.md") (include "fusion.md") (include "pcrel-opt.md") +(include "float16.md") diff --git a/gcc/config/rs6000/rs6000.opt b/gcc/config/rs6000/rs6000.opt index 8632e1064584..28f679ff69c7 100644 --- a/gcc/config/rs6000/rs6000.opt +++ b/gcc/config/rs6000/rs6000.opt @@ -642,6 +642,10 @@ mieee128-constant Target Var(TARGET_IEEE128_CONSTANT) Init(1) Save Generate (do not generate) code that uses the LXVKQ instruction. +mfloat16 +Target Mask(FLOAT16) Var(rs6000_isa_flags) +Enable or disable 16-bit floating point. + ; Documented parameters -param=rs6000-vect-unroll-limit= diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi index 8a2c65a861eb..8ea00cddd491 100644 --- a/gcc/doc/invoke.texi +++ b/gcc/doc/invoke.texi @@ -1404,8 +1404,7 @@ See RS/6000 and PowerPC Options. -mveclibabi=@var{type} -mfriz -mpointers-to-nested-functions -msave-toc-indirect -mpower8-fusion -mcrypto -mhtm -mquad-memory -mquad-memory-atomic --mcompat-align-parm --mfloat128 -mfloat128-hardware +-mcompat-align-parm -mfloat128 -mfloat128-hardware -mfloat16 -mgnu-attribute -mstack-protector-guard=@var{guard} -mstack-protector-guard-reg=@var{reg} -mstack-protector-guard-offset=@var{offset} -mprefixed @@ -32262,6 +32261,28 @@ The default for @option{-mfloat128-hardware} is enabled on PowerPC Linux systems using the ISA 3.0 instruction set, and disabled on other systems. + +@opindex mfloat16 +@opindex mno-float16 +@item -mfloat16 +@itemx -mno-float16 +Enable/disable both the @code{_Float16} and @code{__bf16} keywords +for using 16-bit floating point. + +The @code{_Float16} keyword is for IEEE 16-bit floating point and GCC +generates either software emulation for IEEE 16-bit floating point or +hardware instructions. + +The @code{__bf16} keyword is for Google brain 16-bit floating +point and GCC generates either software emulation for Google brain +16-bit floating point or hardware instructions. + +At the current time, 16-bit floating point support is experimental, +and support may be changed in future releases. + +The configuration option @option{--with-powerpc-float16} controls +whether @option{-mfloat16} is enabled by default. + @opindex m32 @opindex m64 @item -m32 diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi index b99040f56368..60ee6f79acca 100644 --- a/gcc/doc/md.texi +++ b/gcc/doc/md.texi @@ -3373,6 +3373,9 @@ A signed integer constant that can be used with the paddis instruction. @item eV A signed integer constant that paddis and paddi instructions generate. +@item eZ +The floating point constant -0.0. + @ifset INTERNALS @item G A floating point constant that can be loaded into a register with one
