Have a look at: http://www.seul.org/pipermail/geda-dev/2007-September/003804.html
by Andrew Tan, for a starting point. Kind regards, Bert Timmerman. On Wed, 2008-04-02 at 21:01 -0400, Dan McMahill wrote: > Kai-Martin Knaak wrote: > > Now, that the GSoC application deadline was delayed, I'd like to propose > > a project that would definitely improve usability of gschem: > > > > An interactive sub sheet symbol generator > > > > Currently, manual sub sheet generation is a major obstacle when starting > > a hierarchical project. I'd expect this to be a finite project with good > > chance to be completed by the end of summer. Any chance for this proposal > > to enter the GSoC procedure? > > fwiw, a large commercial tool I know of lets you create a symbol from a > schematic or a schematic from a symbol. In the sch->sym direction, you > get a dialog which has a text entry for top,bottom,left,right and they > come pre-filled in with all the pin names. You can re-order the pins > and/or move them to different edges of the symbol. Then hit ok and you > get a box symbol with all the pins. The sym->sch direction just creates > an empty schematic with all the pins in place. Both are pretty darn useful. > > -Dan > > > _______________________________________________ > geda-dev mailing list > [email protected] > http://www.seul.org/cgi-bin/mailman/listinfo/geda-dev _______________________________________________ geda-dev mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-dev
