I created this for LT1764A and friends, it's a DD5. This is exactly their recommended footprint, plus an outline I made up. It's very tight to the part, more so than some I looked at on professionally made boards using the same package.
I did test-fit the part on a 1:1 printout. I initially set the mask and clearance manually, but then I took them out and accepted the default, since I have no experience tuning those. # author: Ben Jackson # email: [EMAIL PROTECTED] # dist-license: GPL 2 # use-license: unlimited # reference: http://www.linear.com/designtools/packaging/ddpak/Q_DD5.pdf Element(0x0 "5-Lead Plastic DD Pak" "U1" "" -20 -650 0 100 0x0) ( Pad(-134 -21 -134 -69 42 "1" "1" 0x0100) Pad(-67 -21 -67 -69 42 "2" "2" 0x0100) Pad(0 -21 0 -69 42 "3" "3" 0x0100) Pad(67 -21 67 -69 42 "4" "4" 0x0100) Pad(134 -21 134 -69 42 "5" "5" 0x0100) Pad(-35 -390 35 -390 350 "tab" "6" 0x0100) ElementLine(-230 -195 -230 -585 10) ElementLine(230 -195 230 -585 10) ElementLine(-230 -585 230 -585 10) ElementLine(-230 -195 230 -195 10) ) -- Ben Jackson AD7GD <[EMAIL PROTECTED]> http://www.ben.com/ _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
