FWIW I just re-submitted, unchanged, the design files for a 48mm x 96mm board that was successfully fabbed by BatchPCB a few weeks ago, just to see if it still passed DRC or if something in their drc-bot has changed. This has front/back silk, front/back mask, front/back copper, and I said "1.3 normal" on the drill file. This file contains bunches of %LN<blivit>% lines.
It passed DRC. So.... ???? I'm not a gerber parser, so I'll just toss that data into the discussion and leave the rest to the gerber experts. -dave Stuart Brorson wrote: > I looked at your posted Gerbers a little more. I can't find any > syntax errors. (And PCB is generally very good about producing > syntactically good Gerber.) > > FWIW, I did notice that your numeric format was %FSLAX24Y24*% > This means: 2.4 format, suppress leading zeros. This means 2 number > to the left of the decimal point, and 4 to the right, with leading > zeros removed. For example: 3.426, 23.623, etc/. > > Make sure you configured your upload to reflect 2.4 format. > > Stuart > > > > On Fri, 7 Mar 2008, Jeff VR wrote: > >> Hello, >> I wanted to drop a quick question to see if anyone here has had any trouble >> with their gerbers being interpreted correctly by batchpcb drc tool. My >> design looks just fine in viewmate and the protoexpress auto DRC passed the >> design. >> >> It seems the only room for error is in the batchpcb project submission page >> where it inquires about the software tool used for the design. I think this >> is for the drill file number format. I'm not really sure what I needed to >> put there so I tried a few different options. I opened the drill file and >> it looked like the format was "1.3 normal". >> >> My design didn't have a back silk screen layer so I created a simple one by >> hand but that didn't get around the issue either. >> >> This is what the log file generates from batchpcb's drc checker for both the >> top and bottom layers: >> Beginning GCODE run >> Invalid DCODE 0 >> GCode execution failed! >> >> Here is the thread on the support forum for batchpcb: >> http://forum.sparkfun.com/viewtopic.php?p=44189#44189 >> >> Thanks, >> Jeff >> > > > _______________________________________________ > geda-user mailing list > [email protected] > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user > > _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
