Hi Andreas, The wiki page is really helpful, but I could not still solve my problem. I specified the trace file, and it only contains an initialization information with out useful trace lines: gem5 system.monitor ??? If I open the trace file with vim, it appears like the above. So I’m still confusing where should I check? Because when checking the mail list, I found my problem should not be there if I connected the commMonitor right.
Thanks for your reply. Chao Zhang Peking University 在 2014年2月14日，下午6:16，Andreas Hansson <[email protected]> 写道： > Hi Chao, > > I have (finally) gotten around to put some more information on the wiki. Have > a look at http://gem5.org/General_Memory_System and see if that is enough to > solve your problem. I suspect you’re not specifying a trace file. > > Andreas > > From: Chao Zhang <[email protected]> > Reply-To: gem5 users mailing list <[email protected]> > Date: Friday, 14 February 2014 01:55 > To: gem5 list users mailing <[email protected]> > Subject: [gem5-users] trace of commMonitor > > Hi all, > > I’m using the commMonitor tracing between L1 and L2 cache. I have connected > it written in “CacheConfig.py”, and find it appears in “config.ini”. So I > think I have connected it right. (Thanks for the guidance of this mail list.) > But after simulation I find there is almost no trace in the generated trace > file in “m5out/" directory. > I ran a benchmark in SE mode for ALPHA ISA, and enabled the “CommMonitor” > debug flag. > > Which part should I check to get the trace? > Could anyone post some sample lines of the trace from commMonitor? > > Regards, > Chao > > > > > -- IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > > ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2557590 > ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2548782 > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
