Hi Andreas, You are right. I’m in atomic mode. I got it fixed by specifying the cpu to timing mode. Thanks very much!
Chao Zhang Peking University 在 2014年2月14日，下午11:19，Andreas Hansson <[email protected]> 写道： > Hi Chao, > > Are you running in timing mode? No output will be collected in atomic as the > time-stamps and stats are rather meaningless (we might want to re-consider > this). > > Andreas > > From: Chao Zhang <[email protected]> > Reply-To: gem5 users mailing list <[email protected]> > Date: Friday, 14 February 2014 14:49 > To: gem5 users mailing list <[email protected]> > Subject: Re: [gem5-users] trace of commMonitor > > Hi Andreas, > > The wiki page is really helpful, but I could not still solve my problem. > I specified the trace file, and it only contains an initialization > information with out useful trace lines: > gem5 > system.monitor ??? > If I open the trace file with vim, it appears like the above. > So I？？？m still confusing where should I check? Because when checking the mail > list, I found my problem should not be there if I connected the commMonitor > right. > > Thanks for your reply. > > Chao Zhang > Peking University > > > > > > 在 2014年2月14日，下午6:16，Andreas Hansson <[email protected]> \xBC 粡欞□\xBE 松 皮 宙瘴\xAC 松 松 \xC9 葹洹 \xA8肅釶跛𥔎 苡揵緕 癇阨鈔 捃 頤\xF4 齒辣 迴鱚 蜴肬鴉癆蜿\xEE 闔 抅\xE5 犾謇\xAE 悲洹 \xE1 跫闍 癆 蔗捥痕夌纃貴闥膀賠鈬鱇赧羅迴鴒灑粔扖\xED 瘤\xE4 黼\xE5 蜀 抅癆 蜩 緕阨艾 捃 齒踝\xE5 籙𣗄 頏閧跂蹼 \xC9 齦齔繝\xF4 籙擄€€\xA9re not specifying a trace file. >> >> Andreas >> >> From: Chao Zhang <[email protected]> >> Reply-To: gem5 users mailing list <[email protected]> >> Date: Friday, 14 February 2014 01:55 >> To: gem5 list users mailing <[email protected]> >> Subject: [gem5-users] trace of commMonitor >> >> Hi all, >> >> I？？？m using the commMonitor tracing between L1 and L2 cache. I have >> connected it written in ？？？CacheConfig.py？？？, and find it appears in >> ？？？config.ini？？？. So I think I have connected it right. (Thanks for the >> guidance of this mail list.) But after simulation I find there is almost no >> trace in the generated trace file in ？？？m5out/" directory. >> I ran a benchmark in SE mode for ALPHA ISA, and enabled the >> ？？？CommMonitor？？？ debug flag. >> >> Which part should I check to get the trace? >> Could anyone post some sample lines of the trace from commMonitor? >> >> Regards, >> Chao >> >> >> >> >> -- IMPORTANT NOTICE: The contents of this email and any attachments are >> confidential and may also be privileged. If you are not the intended >> recipient, please notify the sender immediately and do not disclose the >> contents to any other person, use it for any purpose, or store or copy the >> information in any medium. Thank you. >> >> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >> Registered in England & Wales, Company No: 2557590 >> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >> Registered in England & Wales, Company No: 2548782 >> _______________________________________________ >> gem5-users mailing list >> [email protected] >> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > > -- IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > > ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2557590 > ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2548782 > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
