I guess it is a kernel problem. Can you check out this? Or try to use another kernel?
Atenciosamente, Matheus Alcântara Souza (Via iPhone) > Em 13/10/2014, às 12:22, Stevenson Jian via gem5-users <[email protected]> > escreveu: > > Hi all, > > I am trying to run PARSEC in Gem5 under full system mode. The benchmarks run > correctly when I set the simulated physical memory size to <=2GB. However, I > want to simulate a physical memory with 4GB. When I set "return '4000MB'" in > line 49 of configs/common/Benchmarks.py to set the simulated physical memory > size to 4GB and run PARSEC again (using command "build/ALPHA/gem5.fast > configs/example/fs.py -n 2 > --script=../parsecRunscripts/blackscholes_2c_simlarge_ckpts.rcS"), I get the > following error: > **********simout****************** > ... > panic: M5 panic instruction called at pc = 0xfffffc000031add0. > @ cycle 470482786500 > [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, line > 11210] > Memory Usage: 4273680 KBytes > Program aborted at cycle 470482786500 > Aborted > **********system.terminal********* > ... > setup: forcing memory size to 33554432K (from -98304K).^M > freeing pages 1103:4194304^M > reserving pages 1103:1167^M > SMP: 2 CPUs probed -- cpu_present_map = 3^M > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4165632^M > Kernel command line: root=/dev/hda1 console=ttyS0^M > PID hash table entries: 4096 (order: 12, 32768 bytes)^M > Using epoch = 1900^M > Console: colour dummy device 80x25^M > console [ttyS0] enabled^M > Dentry cache hash table entries: 4194304 (order: 12, 33554432 bytes)^M > Inode-cache hash table entries: 2097152 (order: 11, 16777216 bytes)^M > Memory: 33265208k/33554432k available (3757k kernel code, 285456k reserved, > 261k data, 208k init)^M > Unable to handle kernel paging request at virtual address 0000000000000000^M > CPU 0 swapper(0): Oops 1^M > pc = [<fffffc00003a12dc>] ra = [<fffffc00003a11bc>] ps = 0007 Not > tainted^M > pc is at cache_alloc_refill+0x1ec/0x780^M > ra is at cache_alloc_refill+0xcc/0x780^M > v0 = 0000000000000001 t0 = 0000000000000000 t1 = 0000000000000000^M > t2 = 0000000000000000 t3 = 0000000000000001 t4 = 0000000000000000^M > t5 = 0000000000000000 t6 = fffffc07ff000000 t7 = fffffc0000814000^M > s0 = fffffc000080c2a8 s1 = ffffffffffffffff s2 = fffffc0000822710^M > s3 = fffffc000080c408 s4 = fffffc07ff000030 s5 = 0000000000000000^M > s6 = fffffc000080c448^M > a0 = fffffc000080c448 a1 = 0000000000000009 a2 = 0000000000000001^M > a3 = 0000000000000002 a4 = 0000000000000000 a5 = 0000000000000044^M > t8 = ffffffffffffffff t9 = 0000000000200200 t10= 00000000ffffffff^M > t11= fffffc000080c418 pv = fffffc00006bb0f0 at = fffffc000080c428^M > gp = fffffc000085bf40 sp = fffffc0000817d38^M > Trace:^M > [<fffffc00003a10b8>] kmem_cache_alloc+0xb8/0xf0^M > [<fffffc00003a3334>] kmem_cache_create+0x1f4/0x550^M > [<fffffc000031001c>] __start+0x1c/0x20^M > ^M > Code: 4821f621 402207a1 e43fffe4 a4470000 a4670008 47f6040a <b4430000> > b4620008 ^M > Kernel panic - not syncing: Attempted to kill the idle task!^M > > **************************************** > > To solve the above issue, I looked up former posts and got the idea to > recompile system/alpha/console/console.c. I recompiled console.c using the > cross compile tool on the Gem5 website > (http://www.m5sim.org/dist/current/alpha_crosstool.tar.bz2). Then I put the > compiled console binary in the m5_system_2.0b3 folder. However, now I am > getting a different error message: > > **********************simout*********** > info: Entering event queue @ 0. Starting simulation... > info: Launching CPU 1 @ 686481000 > panic: M5 panic instruction called at pc = 0x8e41. > @ cycle 697785500 > [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, line > 11210] > Memory Usage: 4268400 KBytes > Program aborted at cycle 697785500 > Aborted > > **********************system.terminal***** > ^MGot Configuration 623 > ^Mmemsize FA000000 pages 7D000 > ^MFirst free page after ROM 0xFFFFFC0000018000 > ^MHWRPB 0xFFFFFC0000018000 l1pt 0xFFFFFC0000046000 l2pt 0xFFFFFC0000048000 > l3pt_rpb 0xFFFFFC000004A000 l3pt_kernel 0xFFFFFC000004E000 l2reserv > 0xFFFFFC000004C000 > ^Mkstart = 0xFFFFFC0000310000, kend = 0xFFFFFC0000899860, kentry = > 0xFFFFFC0000310000, numCPUs = 0x2 > ^MCPU Clock at 2000 MHz IntrClockFrequency=1024 > ^MBooting with 2 processor(s) > ^MKSP: 0x20043FE8 PTBR 0x23 > ^MKSP: 0x20043FE8 PTBR 0x23 > ^MConsole Callback at 0x0, fixup at 0x0, crb offset: 0x790 > ^MMemory cluster 0 [0 - 392] > ^MMemory cluster 1 [392 - 511608] > ^MInitalizing mdt_bitmap addr 0xFFFFFC0000038000 mem_pages 7D000 > ^MConsoleDispatch at virt 100008D8 phys 188D8 val FFFFFC00000100A8 > ^MBootstraping CPU 1 with sp=0xFFFFFC000007C000 > ^Munix_boot_mem ends at FFFFFC000007E000 > ^Mk_argc = 0 > ^Mjumping to kernel at 0xFFFFFC0000310000, (PCBB 0xFFFFFC0000018180 pfn 1101) > > ************************************************ > > I then ran GDB on gem5.debug to try to locate the source of the second error. > Here is the gdb output: > > **********GDB************* > info: kernel located at: > /home/xunjian1/scratch/m5_system_2.0b3/binaries/vmlinux_2.6.27-gcc_4.3.4 > Listening for system connection on port 3456 > 0: system.tsunami.io.rtc: Real-time clock set to Thu Jan 1 00:00:00 > 2009 > warn: CoherentBus system.membus has no snooping ports attached! > 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000 > 0: system.remote_gdb.listener: listening for remote gdb #1 on port 7001 > **** REAL SIMULATION **** > 9223372036854775807 > info: Entering event queue @ 0. Starting simulation... > info: Launching CPU 1 @ 686481000 > panic: M5 panic instruction called at pc = 0x8e41. > @ cycle 697785500 > [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, line > 11210] > Memory Usage: 4276644 KBytes > > Program received signal SIGABRT, Aborted. > 0x00007ffff64f3635 in raise () from /lib64/libc.so.6 > Missing separate debuginfos, use: debuginfo-install > glibc-2.12-1.132.el6_5.4.x86_64 keyutils-libs-1.4-4.el6.x86_64 > krb5-libs-1.10.3-15.el6_5.1.x86_64 libcom_err-1.41.12-18.el6_5.1.x86_64 > libgcc-4.4.7-4.el6.x86_64 libselinux-2.0.94-5.3.el6_4.1.x86_64 > libstdc++-4.4.7-4.el6.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64 > python-libs-2.6.6-52.el6.x86_64 zlib-1.2.3-29.el6.x86_64 > (gdb) bt > #0 0x00007ffff64f3635 in raise () from /lib64/libc.so.6 > #1 0x00007ffff64f4e15 in abort () from /lib64/libc.so.6 > #2 0x00000000005925cb in __exit_message (prefix=0x11426f7 "panic", code=-1, > func=0x1142d80 "execute", > file=0x1142780 > "build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc", line=11210, > fmt=0x11429b0 "M5 panic instruction called at pc = %#x.", a01=..., > a02=..., a03=..., a04=..., a05=..., a06=..., a07=..., a08=..., a09=..., > a10=..., a11=..., a12=..., a13=..., a14=..., a15=..., a16=...) at > build/ALPHA/base/misc.cc:84 > #3 0x00000000004ba2f5 in AlphaISAInst::M5panic::execute (this=0x357e940, > xc=0x7ffef5fe4010, traceData=0x0) > at build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc:11210 > #4 0x0000000000850820 in AtomicSimpleCPU::tick (this=0x7ffef5fe4010) at > build/ALPHA/cpu/simple/atomic.cc:525 > #5 0x000000000084c544 in AtomicSimpleCPU::TickEvent::process > (this=0x7ffef60e4280) at build/ALPHA/cpu/simple/atomic.cc:72 > #6 0x0000000000ccd576 in EventQueue::serviceOne (this=0x1992b70) at > build/ALPHA/sim/eventq.cc:204 > #7 0x0000000000d186dc in simulate (num_cycles=9223372036854775807) at > build/ALPHA/sim/simulate.cc:73 > #8 0x0000000000c7ad88 in _wrap_simulate__SWIG_0 (args=0x28ba7d0) at > build/ALPHA/python/swig/event_wrap.cc:4491 > > ******************************* > > I am lost at what I should do next. Please help. Thanks! > > Stevo > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
