I've done a quick research about that.  It seems you need to use the HIGHMEM 
option. Not sure if it works...

Atenciosamente,
Matheus Alcântara Souza
(Via iPhone)

> Em 13/10/2014, às 14:29, Stevenson Jian <[email protected]> escreveu:
> 
> Hi Matheus,
> 
> Thanks for the prompt response. 
> 
> I already tried recompiling the console binary. It resulted in new errors. 
> See the second half of the original post.
> 
> I saw on the website you linked that there are many possible kernel versions. 
> Which kernel do you recommend that I recompile?
> 
> Thanks!
> Stevo
> 
>> On Mon, Oct 13, 2014 at 10:42 AM, Matheus Alcântara Souza 
>> <[email protected]> wrote:
>> Hello Stevo,
>> 
>> Yes, a different vmlinux. Unfortunately, I never build a new kernel to gem5. 
>> Some information here: http://www.m5sim.org/Compiling_a_Linux_Kernel
>> 
>> Other option is to recompile the console binary. Take a look at this thread: 
>> https://www.mail-archive.com/[email protected]/msg03280.html
>> 
>> Best
>> Matheus
>> 
>> 2014-10-13 12:30 GMT-03:00 Stevenson Jian <[email protected]>:
>> 
>>> Hi Matheus,
>>> 
>>> Thanks for the prompt response. I am not certain what you mean by kernel. 
>>> Do you mean use a different vmlinux? I tried both vmlinux and 
>>> vmlinux_2.6.27-gcc_4.3.4. I also tried recompiling system/alpha/palcode/ 
>>> and putting the resultant binary in m5_system_2.0b3/binaries. None of them 
>>> made any difference.
>>> 
>>> Thanks!
>>> Stevo
>>> 
>>>> On Mon, Oct 13, 2014 at 10:25 AM, Matheus Alcântara Souza 
>>>> <[email protected]> wrote:
>>>> I guess it is a kernel problem. Can you check out this? Or try to use 
>>>> another kernel?
>>>> 
>>>> Atenciosamente,
>>>> Matheus Alcântara Souza
>>>> (Via iPhone)
>>>> 
>>>>> Em 13/10/2014, às 12:22, Stevenson Jian via gem5-users 
>>>>> <[email protected]> escreveu:
>>>>> 
>>>> 
>>>>> Hi all,
>>>>> 
>>>>> I am trying to run PARSEC in Gem5 under full system mode. The benchmarks 
>>>>> run correctly when I set the simulated physical memory size to <=2GB. 
>>>>> However, I want to simulate a physical memory with 4GB.  When I set 
>>>>> "return '4000MB'" in line 49 of configs/common/Benchmarks.py to set the 
>>>>> simulated physical memory size to 4GB and run PARSEC again (using command 
>>>>> "build/ALPHA/gem5.fast configs/example/fs.py -n 2 
>>>>> --script=../parsecRunscripts/blackscholes_2c_simlarge_ckpts.rcS"), I get 
>>>>> the following error:
>>>>> **********simout******************
>>>>> ...
>>>>> panic: M5 panic instruction called at pc = 0xfffffc000031add0.
>>>>>  @ cycle 470482786500
>>>>> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, line 
>>>>> 11210]
>>>>> Memory Usage: 4273680 KBytes
>>>>> Program aborted at cycle 470482786500
>>>>> Aborted
>>>>> **********system.terminal*********
>>>>> ...
>>>>> setup: forcing memory size to 33554432K (from -98304K).^M
>>>>> freeing pages 1103:4194304^M
>>>>> reserving pages 1103:1167^M
>>>>> SMP: 2 CPUs probed -- cpu_present_map = 3^M
>>>>> Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 
>>>>> 4165632^M
>>>>> Kernel command line: root=/dev/hda1 console=ttyS0^M
>>>>> PID hash table entries: 4096 (order: 12, 32768 bytes)^M
>>>>> Using epoch = 1900^M
>>>>> Console: colour dummy device 80x25^M
>>>>> console [ttyS0] enabled^M
>>>>> Dentry cache hash table entries: 4194304 (order: 12, 33554432 bytes)^M
>>>>> Inode-cache hash table entries: 2097152 (order: 11, 16777216 bytes)^M
>>>>> Memory: 33265208k/33554432k available (3757k kernel code, 285456k 
>>>>> reserved, 261k data, 208k init)^M
>>>>> Unable to handle kernel paging request at virtual address 
>>>>> 0000000000000000^M
>>>>> CPU 0 swapper(0): Oops 1^M
>>>>> pc = [<fffffc00003a12dc>]  ra = [<fffffc00003a11bc>]  ps = 0007    Not 
>>>>> tainted^M
>>>>> pc is at cache_alloc_refill+0x1ec/0x780^M
>>>>> ra is at cache_alloc_refill+0xcc/0x780^M
>>>>> v0 = 0000000000000001  t0 = 0000000000000000  t1 = 0000000000000000^M
>>>>> t2 = 0000000000000000  t3 = 0000000000000001  t4 = 0000000000000000^M
>>>>> t5 = 0000000000000000  t6 = fffffc07ff000000  t7 = fffffc0000814000^M
>>>>> s0 = fffffc000080c2a8  s1 = ffffffffffffffff  s2 = fffffc0000822710^M
>>>>> s3 = fffffc000080c408  s4 = fffffc07ff000030  s5 = 0000000000000000^M
>>>>> s6 = fffffc000080c448^M
>>>>> a0 = fffffc000080c448  a1 = 0000000000000009  a2 = 0000000000000001^M
>>>>> a3 = 0000000000000002  a4 = 0000000000000000  a5 = 0000000000000044^M
>>>>> t8 = ffffffffffffffff  t9 = 0000000000200200  t10= 00000000ffffffff^M
>>>>> t11= fffffc000080c418  pv = fffffc00006bb0f0  at = fffffc000080c428^M
>>>>> gp = fffffc000085bf40  sp = fffffc0000817d38^M
>>>>> Trace:^M
>>>>> [<fffffc00003a10b8>] kmem_cache_alloc+0xb8/0xf0^M
>>>>> [<fffffc00003a3334>] kmem_cache_create+0x1f4/0x550^M
>>>>> [<fffffc000031001c>] __start+0x1c/0x20^M
>>>>> ^M
>>>>> Code: 4821f621  402207a1  e43fffe4  a4470000  a4670008  47f6040a 
>>>>> <b4430000> b4620008 ^M
>>>>> Kernel panic - not syncing: Attempted to kill the idle task!^M
>>>>> 
>>>>> ****************************************
>>>>> 
>>>>> To solve the above issue, I looked up former posts  and got the idea to 
>>>>> recompile system/alpha/console/console.c. I recompiled console.c using 
>>>>> the cross compile tool on the Gem5 website 
>>>>> (http://www.m5sim.org/dist/current/alpha_crosstool.tar.bz2). Then I put 
>>>>> the compiled console binary in the m5_system_2.0b3 folder. However, now I 
>>>>> am getting a different error message:
>>>>> 
>>>>> **********************simout***********
>>>>> info: Entering event queue @ 0.  Starting simulation...
>>>>> info: Launching CPU 1 @ 686481000
>>>>> panic: M5 panic instruction called at pc = 0x8e41.
>>>>>  @ cycle 697785500
>>>>> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, line 
>>>>> 11210]
>>>>> Memory Usage: 4268400 KBytes
>>>>> Program aborted at cycle 697785500
>>>>> Aborted
>>>>> 
>>>>> **********************system.terminal*****
>>>>> ^MGot Configuration 623
>>>>> ^Mmemsize FA000000 pages 7D000
>>>>> ^MFirst free page after ROM 0xFFFFFC0000018000
>>>>> ^MHWRPB 0xFFFFFC0000018000 l1pt 0xFFFFFC0000046000 l2pt 
>>>>> 0xFFFFFC0000048000 l3pt_rpb 0xFFFFFC000004A000 l3pt_kernel 
>>>>> 0xFFFFFC000004E000 l2reserv 0xFFFFFC000004C000
>>>>> ^Mkstart = 0xFFFFFC0000310000, kend = 0xFFFFFC0000899860, kentry = 
>>>>> 0xFFFFFC0000310000, numCPUs = 0x2
>>>>> ^MCPU Clock at 2000 MHz IntrClockFrequency=1024
>>>>> ^MBooting with 2 processor(s)
>>>>> ^MKSP: 0x20043FE8 PTBR 0x23
>>>>> ^MKSP: 0x20043FE8 PTBR 0x23
>>>>> ^MConsole Callback at 0x0, fixup at 0x0, crb offset: 0x790
>>>>> ^MMemory cluster 0 [0 - 392]
>>>>> ^MMemory cluster 1 [392 - 511608]
>>>>> ^MInitalizing mdt_bitmap addr 0xFFFFFC0000038000 mem_pages 7D000
>>>>> ^MConsoleDispatch at virt 100008D8 phys 188D8 val FFFFFC00000100A8
>>>>> ^MBootstraping CPU 1 with sp=0xFFFFFC000007C000
>>>>> ^Munix_boot_mem ends at FFFFFC000007E000
>>>>> ^Mk_argc = 0
>>>>> ^Mjumping to kernel at 0xFFFFFC0000310000, (PCBB 0xFFFFFC0000018180 pfn 
>>>>> 1101)
>>>>> 
>>>>> ************************************************
>>>>> 
>>>>> I then ran GDB on gem5.debug to try to locate the source of the second 
>>>>> error. Here is the gdb output:
>>>>> 
>>>>> **********GDB*************
>>>>> info: kernel located at: 
>>>>> /home/xunjian1/scratch/m5_system_2.0b3/binaries/vmlinux_2.6.27-gcc_4.3.4
>>>>> Listening for system connection on port 3456
>>>>>       0: system.tsunami.io.rtc: Real-time clock set to Thu Jan  1 
>>>>> 00:00:00 2009
>>>>> warn: CoherentBus system.membus has no snooping ports attached!
>>>>> 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
>>>>> 0: system.remote_gdb.listener: listening for remote gdb #1 on port 7001
>>>>> **** REAL SIMULATION ****
>>>>> 9223372036854775807
>>>>> info: Entering event queue @ 0.  Starting simulation...
>>>>> info: Launching CPU 1 @ 686481000
>>>>> panic: M5 panic instruction called at pc = 0x8e41.
>>>>>  @ cycle 697785500
>>>>> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc, line 
>>>>> 11210]
>>>>> Memory Usage: 4276644 KBytes
>>>>> 
>>>>> Program received signal SIGABRT, Aborted.
>>>>> 0x00007ffff64f3635 in raise () from /lib64/libc.so.6
>>>>> Missing separate debuginfos, use: debuginfo-install 
>>>>> glibc-2.12-1.132.el6_5.4.x86_64 keyutils-libs-1.4-4.el6.x86_64 
>>>>> krb5-libs-1.10.3-15.el6_5.1.x86_64 libcom_err-1.41.12-18.el6_5.1.x86_64 
>>>>> libgcc-4.4.7-4.el6.x86_64 libselinux-2.0.94-5.3.el6_4.1.x86_64 
>>>>> libstdc++-4.4.7-4.el6.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64 
>>>>> python-libs-2.6.6-52.el6.x86_64 zlib-1.2.3-29.el6.x86_64
>>>>> (gdb) bt
>>>>> #0  0x00007ffff64f3635 in raise () from /lib64/libc.so.6
>>>>> #1  0x00007ffff64f4e15 in abort () from /lib64/libc.so.6
>>>>> #2  0x00000000005925cb in __exit_message (prefix=0x11426f7 "panic", 
>>>>> code=-1, func=0x1142d80 "execute", 
>>>>>     file=0x1142780 
>>>>> "build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc", line=11210, 
>>>>>     fmt=0x11429b0 "M5 panic instruction called at pc = %#x.", a01=..., 
>>>>> a02=..., a03=..., a04=..., a05=..., a06=..., a07=..., a08=..., a09=..., 
>>>>>     a10=..., a11=..., a12=..., a13=..., a14=..., a15=..., a16=...) at 
>>>>> build/ALPHA/base/misc.cc:84
>>>>> #3  0x00000000004ba2f5 in AlphaISAInst::M5panic::execute (this=0x357e940, 
>>>>> xc=0x7ffef5fe4010, traceData=0x0)
>>>>>     at build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc:11210
>>>>> #4  0x0000000000850820 in AtomicSimpleCPU::tick (this=0x7ffef5fe4010) at 
>>>>> build/ALPHA/cpu/simple/atomic.cc:525
>>>>> #5  0x000000000084c544 in AtomicSimpleCPU::TickEvent::process 
>>>>> (this=0x7ffef60e4280) at build/ALPHA/cpu/simple/atomic.cc:72
>>>>> #6  0x0000000000ccd576 in EventQueue::serviceOne (this=0x1992b70) at 
>>>>> build/ALPHA/sim/eventq.cc:204
>>>>> #7  0x0000000000d186dc in simulate (num_cycles=9223372036854775807) at 
>>>>> build/ALPHA/sim/simulate.cc:73
>>>>> #8  0x0000000000c7ad88 in _wrap_simulate__SWIG_0 (args=0x28ba7d0) at 
>>>>> build/ALPHA/python/swig/event_wrap.cc:4491
>>>>> 
>>>>> *******************************
>>>>> 
>>>>> I am lost at what I should do next. Please help. Thanks!
>>>>> 
>>>>> Stevo
>>>>> 
>>>>> _______________________________________________
>>>>> gem5-users mailing list
>>>>> [email protected]
>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
>> 
>> 
>> 
>> -- 
>> 
>> --
>> Atenciosamente,
>> Matheus Alcântara Souza
> 
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to