Hi Matheus,

Thanks for the prompt response.

I already tried recompiling the console binary. It resulted in new errors.
See the second half of the original post.

I saw on the website you linked that there are many possible kernel
versions. Which kernel do you recommend that I recompile?

Thanks!
Stevo

On Mon, Oct 13, 2014 at 10:42 AM, Matheus Alcântara Souza <
[email protected]> wrote:

> Hello Stevo,
>
> Yes, a different vmlinux. Unfortunately, I never build a new kernel to
> gem5. Some information here: http://www.m5sim.org/Compiling_a_Linux_Kernel
>
> Other option is to recompile the console binary. Take a look at this
> thread: https://www.mail-archive.com/[email protected]/msg03280.html
>
> Best
> Matheus
>
> 2014-10-13 12:30 GMT-03:00 Stevenson Jian <[email protected]>:
>
> Hi Matheus,
>>
>> Thanks for the prompt response. I am not certain what you mean by kernel.
>> Do you mean use a different vmlinux? I tried both vmlinux and 
>> vmlinux_2.6.27-gcc_4.3.4.
>> I also tried recompiling system/alpha/palcode/ and putting the resultant
>> binary in m5_system_2.0b3/binaries. None of them made any difference.
>>
>> Thanks!
>> Stevo
>>
>> On Mon, Oct 13, 2014 at 10:25 AM, Matheus Alcântara Souza <
>> [email protected]> wrote:
>>
>>> I guess it is a kernel problem. Can you check out this? Or try to use
>>> another kernel?
>>>
>>> Atenciosamente,
>>> Matheus Alcântara Souza
>>> (Via iPhone)
>>>
>>> Em 13/10/2014, às 12:22, Stevenson Jian via gem5-users <
>>> [email protected]> escreveu:
>>>
>>> Hi all,
>>>
>>> I am trying to run PARSEC in Gem5 under full system mode. The benchmarks
>>> run correctly when I set the simulated physical memory size to <=2GB.
>>> However, I want to simulate a physical memory with 4GB.  When I set "return
>>> '4000MB'" in line 49 of configs/common/Benchmarks.py to set the simulated
>>> physical memory size to 4GB and run PARSEC again (using command
>>> "build/ALPHA/gem5.fast configs/example/fs.py -n 2
>>> --script=../parsecRunscripts/blackscholes_2c_simlarge_ckpts.rcS"), I get
>>> the following error:
>>> **********simout******************
>>> ...
>>> panic: M5 panic instruction called at pc = 0xfffffc000031add0.
>>>  @ cycle 470482786500
>>> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc,
>>> line 11210]
>>> Memory Usage: 4273680 KBytes
>>> Program aborted at cycle 470482786500
>>> Aborted
>>> **********system.terminal*********
>>> ...
>>> setup: forcing memory size to 33554432K (from -98304K).^M
>>> freeing pages 1103:4194304^M
>>> reserving pages 1103:1167^M
>>> SMP: 2 CPUs probed -- cpu_present_map = 3^M
>>> Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
>>> 4165632^M
>>> Kernel command line: root=/dev/hda1 console=ttyS0^M
>>> PID hash table entries: 4096 (order: 12, 32768 bytes)^M
>>> Using epoch = 1900^M
>>> Console: colour dummy device 80x25^M
>>> console [ttyS0] enabled^M
>>> Dentry cache hash table entries: 4194304 (order: 12, 33554432 bytes)^M
>>> Inode-cache hash table entries: 2097152 (order: 11, 16777216 bytes)^M
>>> Memory: 33265208k/33554432k available (3757k kernel code, 285456k
>>> reserved, 261k data, 208k init)^M
>>> Unable to handle kernel paging request at virtual address
>>> 0000000000000000^M
>>> CPU 0 swapper(0): Oops 1^M
>>> pc = [<fffffc00003a12dc>]  ra = [<fffffc00003a11bc>]  ps = 0007    Not
>>> tainted^M
>>> pc is at cache_alloc_refill+0x1ec/0x780^M
>>> ra is at cache_alloc_refill+0xcc/0x780^M
>>> v0 = 0000000000000001  t0 = 0000000000000000  t1 = 0000000000000000^M
>>> t2 = 0000000000000000  t3 = 0000000000000001  t4 = 0000000000000000^M
>>> t5 = 0000000000000000  t6 = fffffc07ff000000  t7 = fffffc0000814000^M
>>> s0 = fffffc000080c2a8  s1 = ffffffffffffffff  s2 = fffffc0000822710^M
>>> s3 = fffffc000080c408  s4 = fffffc07ff000030  s5 = 0000000000000000^M
>>> s6 = fffffc000080c448^M
>>> a0 = fffffc000080c448  a1 = 0000000000000009  a2 = 0000000000000001^M
>>> a3 = 0000000000000002  a4 = 0000000000000000  a5 = 0000000000000044^M
>>> t8 = ffffffffffffffff  t9 = 0000000000200200  t10= 00000000ffffffff^M
>>> t11= fffffc000080c418  pv = fffffc00006bb0f0  at = fffffc000080c428^M
>>> gp = fffffc000085bf40  sp = fffffc0000817d38^M
>>> Trace:^M
>>> [<fffffc00003a10b8>] kmem_cache_alloc+0xb8/0xf0^M
>>> [<fffffc00003a3334>] kmem_cache_create+0x1f4/0x550^M
>>> [<fffffc000031001c>] __start+0x1c/0x20^M
>>> ^M
>>> Code: 4821f621  402207a1  e43fffe4  a4470000  a4670008  47f6040a
>>> <b4430000> b4620008 ^M
>>> Kernel panic - not syncing: Attempted to kill the idle task!^M
>>>
>>> ****************************************
>>>
>>> To solve the above issue, I looked up former posts  and got the idea to
>>> recompile system/alpha/console/console.c. I recompiled console.c using the
>>> cross compile tool on the Gem5 website (
>>> http://www.m5sim.org/dist/current/alpha_crosstool.tar.bz2). Then I put
>>> the compiled console binary in the m5_system_2.0b3 folder. However, now I
>>> am getting a different error message:
>>>
>>> **********************simout***********
>>> info: Entering event queue @ 0.  Starting simulation...
>>> info: Launching CPU 1 @ 686481000
>>> panic: M5 panic instruction called at pc = 0x8e41.
>>>  @ cycle 697785500
>>> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc,
>>> line 11210]
>>> Memory Usage: 4268400 KBytes
>>> Program aborted at cycle 697785500
>>> Aborted
>>>
>>> **********************system.terminal*****
>>> ^MGot Configuration 623
>>> ^Mmemsize FA000000 pages 7D000
>>> ^MFirst free page after ROM 0xFFFFFC0000018000
>>> ^MHWRPB 0xFFFFFC0000018000 l1pt 0xFFFFFC0000046000 l2pt
>>> 0xFFFFFC0000048000 l3pt_rpb 0xFFFFFC000004A000 l3pt_kernel
>>> 0xFFFFFC000004E000 l2reserv 0xFFFFFC000004C000
>>> ^Mkstart = 0xFFFFFC0000310000, kend = 0xFFFFFC0000899860, kentry =
>>> 0xFFFFFC0000310000, numCPUs = 0x2
>>> ^MCPU Clock at 2000 MHz IntrClockFrequency=1024
>>> ^MBooting with 2 processor(s)
>>> ^MKSP: 0x20043FE8 PTBR 0x23
>>> ^MKSP: 0x20043FE8 PTBR 0x23
>>> ^MConsole Callback at 0x0, fixup at 0x0, crb offset: 0x790
>>> ^MMemory cluster 0 [0 - 392]
>>> ^MMemory cluster 1 [392 - 511608]
>>> ^MInitalizing mdt_bitmap addr 0xFFFFFC0000038000 mem_pages 7D000
>>> ^MConsoleDispatch at virt 100008D8 phys 188D8 val FFFFFC00000100A8
>>> ^MBootstraping CPU 1 with sp=0xFFFFFC000007C000
>>> ^Munix_boot_mem ends at FFFFFC000007E000
>>> ^Mk_argc = 0
>>> ^Mjumping to kernel at 0xFFFFFC0000310000, (PCBB 0xFFFFFC0000018180 pfn
>>> 1101)
>>>
>>> ************************************************
>>>
>>> I then ran GDB on gem5.debug to try to locate the source of the second
>>> error. Here is the gdb output:
>>>
>>> **********GDB*************
>>> info: kernel located at:
>>> /home/xunjian1/scratch/m5_system_2.0b3/binaries/vmlinux_2.6.27-gcc_4.3.4
>>> Listening for system connection on port 3456
>>>       0: system.tsunami.io.rtc: Real-time clock set to Thu Jan  1
>>> 00:00:00 2009
>>> warn: CoherentBus system.membus has no snooping ports attached!
>>> 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
>>> 0: system.remote_gdb.listener: listening for remote gdb #1 on port 7001
>>> **** REAL SIMULATION ****
>>> 9223372036854775807
>>> info: Entering event queue @ 0.  Starting simulation...
>>> info: Launching CPU 1 @ 686481000
>>> panic: M5 panic instruction called at pc = 0x8e41.
>>>  @ cycle 697785500
>>> [execute:build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc,
>>> line 11210]
>>> Memory Usage: 4276644 KBytes
>>>
>>> Program received signal SIGABRT, Aborted.
>>> 0x00007ffff64f3635 in raise () from /lib64/libc.so.6
>>> Missing separate debuginfos, use: debuginfo-install
>>> glibc-2.12-1.132.el6_5.4.x86_64 keyutils-libs-1.4-4.el6.x86_64
>>> krb5-libs-1.10.3-15.el6_5.1.x86_64 libcom_err-1.41.12-18.el6_5.1.x86_64
>>> libgcc-4.4.7-4.el6.x86_64 libselinux-2.0.94-5.3.el6_4.1.x86_64
>>> libstdc++-4.4.7-4.el6.x86_64 openssl-1.0.1e-16.el6_5.14.x86_64
>>> python-libs-2.6.6-52.el6.x86_64 zlib-1.2.3-29.el6.x86_64
>>> (gdb) bt
>>> #0  0x00007ffff64f3635 in raise () from /lib64/libc.so.6
>>> #1  0x00007ffff64f4e15 in abort () from /lib64/libc.so.6
>>> #2  0x00000000005925cb in __exit_message (prefix=0x11426f7 "panic",
>>> code=-1, func=0x1142d80 "execute",
>>>     file=0x1142780
>>> "build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc", line=11210,
>>>     fmt=0x11429b0 "M5 panic instruction called at pc = %#x.", a01=...,
>>> a02=..., a03=..., a04=..., a05=..., a06=..., a07=..., a08=..., a09=...,
>>>     a10=..., a11=..., a12=..., a13=..., a14=..., a15=..., a16=...) at
>>> build/ALPHA/base/misc.cc:84
>>> #3  0x00000000004ba2f5 in AlphaISAInst::M5panic::execute
>>> (this=0x357e940, xc=0x7ffef5fe4010, traceData=0x0)
>>>     at build/ALPHA/arch/alpha/generated/atomic_simple_cpu_exec.cc:11210
>>> #4  0x0000000000850820 in AtomicSimpleCPU::tick (this=0x7ffef5fe4010) at
>>> build/ALPHA/cpu/simple/atomic.cc:525
>>> #5  0x000000000084c544 in AtomicSimpleCPU::TickEvent::process
>>> (this=0x7ffef60e4280) at build/ALPHA/cpu/simple/atomic.cc:72
>>> #6  0x0000000000ccd576 in EventQueue::serviceOne (this=0x1992b70) at
>>> build/ALPHA/sim/eventq.cc:204
>>> #7  0x0000000000d186dc in simulate (num_cycles=9223372036854775807) at
>>> build/ALPHA/sim/simulate.cc:73
>>> #8  0x0000000000c7ad88 in _wrap_simulate__SWIG_0 (args=0x28ba7d0) at
>>> build/ALPHA/python/swig/event_wrap.cc:4491
>>>
>>> *******************************
>>>
>>> I am lost at what I should do next. Please help. Thanks!
>>>
>>> Stevo
>>>
>>> _______________________________________________
>>> gem5-users mailing list
>>> [email protected]
>>> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
>>>
>>>
>>
>
>
> --
>
> --
> Atenciosamente,
> Matheus Alcântara Souza
>
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to