even if you are talking about stictly line in , you want to make sure that the line in recording device is checked in your Soundcard mixer.
Elbert Dee ----- Original Message ----- From: "Thomas Barstow" <[email protected]> To: <[email protected]> Sent: Saturday, January 12, 2008 9:51 PM Subject: RE: [General-discussion] Mic line in setup? >I get that your trying to setup the Mic and I go to Voice FX then hit >config (make sure mic is off). Then I set my record sound card device set >to SoundBlaster. I have no problem with it working that way. My input >line from mixer is got to mic input on SoundBlaster card. I found the best >sound I get is with a Logitech 19.95 headset. I have 5 other commerical >mics and could not get them to sound clear and strong at the same time. So >I run this mic thru sams and out to the mixer. Works better. I have tried >realtik sound card and got ton's echo and distortion so installed >soundblaster which works a lot better. > > -----Original Message----- >>From: Bill Burns <[email protected]> >>Sent: Jan 12, 2008 8:29 PM >>To: 'Dj Liqid Touch' <[email protected]>, >>[email protected] >>Subject: RE: [General-discussion] Mic line in setup? >> >>Sorry... >> >>And the latency... well I've had it since ver 2.0 I just mute the sound >>while talking and when I'd one unmute it all. I've tried various cards, >>SB lives, onboards, and professional audio cards... never got rid of it. >>So I just dealt with it that way. >> >>As far as the settings.. I'll have to look on the laptop... >> >>-----Original Message----- >>From: [email protected] >>[mailto:[email protected]] On Behalf >>Of Dj Liqid Touch >>Sent: Saturday, January 12, 2008 8:16 PM >>To: [email protected] >>Subject: Re: [General-discussion] Mic line in setup? >> >>please re read my message below because your responce has nothing to do >>with >>SAM MIC LINE IN settings and everything to do with WINDOWS SOUND MIXER >>MIC >>SETTINGS. >> >> >> >> >>----- Original Message ----- >>From: Bill Burns >>To: 'Dj Liqid Touch' ; [email protected] >>Sent: Saturday, January 12, 2008 7:22 PM >>Subject: RE: [General-discussion] Mic line in setup? >> >> >>3/4 of the way up, and no mic boost >> >>-----Original Message----- >>From: [email protected] >>[mailto:[email protected]] On Behalf >>Of Dj Liqid Touch >>Sent: Saturday, January 12, 2008 6:09 PM >>To: [email protected] >>Subject: [General-discussion] Mic line in setup? >> >>can someone give me an average settings for using the MIC/LINE IN ? >> >> >>when i goto my Queue list i click the dropdown next to the ( + ) button >>and i select MIC/LINE IN >> >>but then i see a number of other choices >> >>i do NOT want any buffering or latency to take place. >>I have my mic come into the computer not before it goes through a TON of >> >>other processors and equipment because its starting from my DJ equipment >> >>setup >> >>Any processing for the mic sound is done BEFORE it gets to the compute. >>So i dont need any processing to take place. >> >>I think i keep setting it wrong because im getting plenty of echo or >>just >>VERY late responce from the sound coming into the mic input. >> >>I speak and wait as much as 7 seconds before i hear myself. >>Then when its finally playing the MIC sound, its plenty distorted >> >>i tried looking at other threads about this and testing with those >>suggestions but ot no avail >> >> >> >>For RECORD DRIVER & RECORD SOUDCARD DEVICE >>i know what to set but >>the dropdown below that? what should i choose? im pluged into a MIC >>input. >> >>Also i keep seting the BUFFER settings WAY down to as little as they >>BOTH >>will go ( Packets + Packet Time ) i place all the way to the left >> >>Duraction i leave turned off because i want to manially stop it >> >>_______________________________________________ >>General-discussion mailing list >>[email protected] >>http://mailman.spacialaudio.com/mailman/listinfo/general-discussion >> >>TO unsubscribe to this list, simply send a blank email to >>[email protected] >> >>with the subject >>'unsubscribe' >> >>No virus found in this incoming message. >>Checked by AVG Free Edition. >>Version: 7.5.516 / Virus Database: 269.19.0/1218 - Release Date: >>1/10/2008 1:32 PM >> >> >>No virus found in this outgoing message. >>Checked by AVG Free Edition. >>Version: 7.5.516 / Virus Database: 269.19.0/1218 - Release Date: >>1/10/2008 1:32 PM >> >> >>_______________________________________________ >>General-discussion mailing list >>[email protected] >>http://mailman.spacialaudio.com/mailman/listinfo/general-discussion >> >>TO unsubscribe to this list, simply send a blank email to >>[email protected] >> >>with the subject >>'unsubscribe' >> >>No virus found in this incoming message. >>Checked by AVG Free Edition. >>Version: 7.5.516 / Virus Database: 269.19.0/1218 - Release Date: >>1/10/2008 1:32 PM >> >> >>No virus found in this outgoing message. >>Checked by AVG Free Edition. >>Version: 7.5.516 / Virus Database: 269.19.0/1218 - Release Date: >>1/10/2008 1:32 PM >> >> >>_______________________________________________ >>General-discussion mailing list >>[email protected] >>http://mailman.spacialaudio.com/mailman/listinfo/general-discussion >> >>TO unsubscribe to this list, simply send a blank email to >>[email protected] >> >>with the subject >>'unsubscribe' > > > Sound Machine Radio > www.soundmachineradio.com > > DJ Bear Internet DJ's > www.myspace.com/internetdjs > > _______________________________________________ > General-discussion mailing list > [email protected] > http://mailman.spacialaudio.com/mailman/listinfo/general-discussion > > TO unsubscribe to this list, simply send a blank email to > [email protected] > > with the subject > 'unsubscribe' > >
