I get that your trying to setup the Mic and I go to Voice FX then hit config (make sure mic is off). Then I set my record sound card device set to SoundBlaster. I have no problem with it working that way. My input line from mixer is got to mic input on SoundBlaster card. I found the best sound I get is with a Logitech 19.95 headset. I have 5 other commerical mics and could not get them to sound clear and strong at the same time. So I run this mic thru sams and out to the mixer. Works better. I have tried realtik sound card and got ton's echo and distortion so installed soundblaster which works a lot better.
-----Original Message----- >From: Bill Burns <[email protected]> >Sent: Jan 12, 2008 8:29 PM >To: 'Dj Liqid Touch' <[email protected]>, >[email protected] >Subject: RE: [General-discussion] Mic line in setup? > >Sorry... > >And the latency... well I've had it since ver 2.0 I just mute the sound >while talking and when I'd one unmute it all. I've tried various cards, >SB lives, onboards, and professional audio cards... never got rid of it. >So I just dealt with it that way. > >As far as the settings.. I'll have to look on the laptop... > >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf >Of Dj Liqid Touch >Sent: Saturday, January 12, 2008 8:16 PM >To: [email protected] >Subject: Re: [General-discussion] Mic line in setup? > >please re read my message below because your responce has nothing to do >with >SAM MIC LINE IN settings and everything to do with WINDOWS SOUND MIXER >MIC >SETTINGS. > > > > >----- Original Message ----- >From: Bill Burns >To: 'Dj Liqid Touch' ; [email protected] >Sent: Saturday, January 12, 2008 7:22 PM >Subject: RE: [General-discussion] Mic line in setup? > > >3/4 of the way up, and no mic boost > >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf >Of Dj Liqid Touch >Sent: Saturday, January 12, 2008 6:09 PM >To: [email protected] >Subject: [General-discussion] Mic line in setup? > >can someone give me an average settings for using the MIC/LINE IN ? > > >when i goto my Queue list i click the dropdown next to the ( + ) button >and i select MIC/LINE IN > >but then i see a number of other choices > >i do NOT want any buffering or latency to take place. >I have my mic come into the computer not before it goes through a TON of > >other processors and equipment because its starting from my DJ equipment > >setup > >Any processing for the mic sound is done BEFORE it gets to the compute. >So i dont need any processing to take place. > >I think i keep setting it wrong because im getting plenty of echo or >just >VERY late responce from the sound coming into the mic input. > >I speak and wait as much as 7 seconds before i hear myself. >Then when its finally playing the MIC sound, its plenty distorted > >i tried looking at other threads about this and testing with those >suggestions but ot no avail > > > >For RECORD DRIVER & RECORD SOUDCARD DEVICE >i know what to set but >the dropdown below that? what should i choose? im pluged into a MIC >input. > >Also i keep seting the BUFFER settings WAY down to as little as they >BOTH >will go ( Packets + Packet Time ) i place all the way to the left > >Duraction i leave turned off because i want to manially stop it > >_______________________________________________ >General-discussion mailing list >[email protected] >http://mailman.spacialaudio.com/mailman/listinfo/general-discussion > >TO unsubscribe to this list, simply send a blank email to >[email protected] > >with the subject >'unsubscribe' > >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.5.516 / Virus Database: 269.19.0/1218 - Release Date: >1/10/2008 1:32 PM > > >No virus found in this outgoing message. >Checked by AVG Free Edition. >Version: 7.5.516 / Virus Database: 269.19.0/1218 - Release Date: >1/10/2008 1:32 PM > > >_______________________________________________ >General-discussion mailing list >[email protected] >http://mailman.spacialaudio.com/mailman/listinfo/general-discussion > >TO unsubscribe to this list, simply send a blank email to >[email protected] > >with the subject >'unsubscribe' > >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.5.516 / Virus Database: 269.19.0/1218 - Release Date: >1/10/2008 1:32 PM > > >No virus found in this outgoing message. >Checked by AVG Free Edition. >Version: 7.5.516 / Virus Database: 269.19.0/1218 - Release Date: >1/10/2008 1:32 PM > > >_______________________________________________ >General-discussion mailing list >[email protected] >http://mailman.spacialaudio.com/mailman/listinfo/general-discussion > >TO unsubscribe to this list, simply send a blank email to >[email protected] > >with the subject >'unsubscribe' Sound Machine Radio www.soundmachineradio.com DJ Bear Internet DJ's www.myspace.com/internetdjs
